CAJ | 학술논문

将铁基纳米微晶合金薄带缠绕并嵌入圆柱型应力敏感芯，利用压磁效应，使传感器实现拉压力测量。介绍了传感器的结构和原理，推导出传感器的输出特性方程。通过静态压缩试验，分析了传感器的激磁磁场强度、激磁电流强度、激磁频率以及温度变化对传感器输出的影响，得出了室温下传感器的静态特性。试验数据显示，传感器的最大非线性误差小于1.16％F．S，重复性误差为0.53％F．S，迟滞误差为0.36％F．S，平均灵敏度为1.14 mV／kN．对一般的工程应用是可行的。
장철기납미미정합금박대전요병감입원주형응력민감심，이용압자효응，사전감기실현랍압력측량。개소료전감기적결구화원리，추도출전감기적수출특성방정。통과정태압축시험，분석료전감기적격자자장강도、격자전류강도、격자빈솔이급온도변화대전감기수출적영향，득출료실온하전감기적정태특성。시험수거현시，전감기적최대비선성오차소우1.16％F．S，중복성오차위0.53％F．S，지체오차위0.36％F．S，평균령민도위1.14 mV／kN．대일반적공정응용시가행적。
By wrapping Fe-based nanocrystalline alloy strip into a cylindrical stress-sensitive magnetic , a novel tension and compression force sensor was made based on magneto-elastic effect .The principle and structure of the sensor were presented ,and its output characteristic equation was derived .By making a tensile and compression measuring experiment ,the excitation magnetic field intensity ,current intensity ,frequency and temperature change of the sensor influence on its output were analyzed .The static charac-teristics and characteristics of the load cell were got .The experimental result shows the maximum linearity error of the load cell is less than1.16%F.S,repetitive error is 0.53%F.S,hysteresis error is 0.53%F.S and the average sensitivity is 1.14.The load cell can be used for general engineering applications .