CAJ | 학술논문

为了研究几何布置对核料位测量工作性能的影响，并找出最佳的布置方式，分别对三种实验装置几何布置进行了实验模拟。结果表明，吸收法精确度最高，散射法次之，工作曲线法最差；从实验过程来看，吸收法和散射法需测多组数据才可得出料位位置；而工作曲线法，当作出工作曲线后，只需测一组数据，就可得出物料的料位位置，此方法更方便、简单和省时。
위료연구궤하포치대핵료위측량공작성능적영향，병조출최가적포치방식，분별대삼충실험장치궤하포치진행료실험모의。결과표명，흡수법정학도최고，산사법차지，공작곡선법최차；종실험과정래간，흡수법화산사법수측다조수거재가득출료위위치；이공작곡선법，당작출공작곡선후，지수측일조수거，취가득출물료적료위위치，차방법경방편、간단화성시。
In order to study the effect of the geometric arrangements on the nuclear level measurement perform -ance and find out the best arrangement , the three experimental device geometrical arrangements were experi -mentally studied .The results indicate that the absorption method is of the highest accuracy , the second is the scattering method , the lowest is the working curve method .However , judging from the experimental process , the absorption and the scattering method need subgroup date , while the working curve method only need one set of date.So the working curve method is simple , quick and time-saving comparing with others .