CAJ | 학술논문

建立钛基复合材料叶环三维循环对称有限元模型，分析其应力分布和超转失效。重点研究纤维体积分数、增强面积、热残余应力及2种不同温度对叶环应力分布的影响。通过分析在一系列转速下叶环的环向应力得到其极限转速。结果表明：在2种不同温度下，纤维体积分数和增强面积对叶环应力的分布和大小影响不同。研究结果为叶环的结构设计提供了一定的建议。当考虑热残余应力时，在较高的温度下，较大的增强面积对叶环的设计是有利的。
건립태기복합재료협배삼유순배대칭유한원모형，분석기응력분포화초전실효。중점연구섬유체적분수、증강면적、열잔여응력급2충불동온도대협배응력분포적영향。통과분석재일계렬전속하협배적배향응력득도기겁한전속。결과표명：재2충불동온도하，섬유체적분수화증강면적대협배응력적분포화대소영향불동。연구결과위협배적결구설계제공료일정적건의。당고필열잔여응력시，재교고적온도하，교대적증강면적대협배적설계시유리적。
A three-dimensional cyclic symmetry finite element model of titanium-matrix composites (TMCs) ring was developed to investigate the stress distribution and burst failure. The effects of fiber volume fractions, reinforced areas, thermal residual stresses and two different temperatures on stress distribution were studied. The burst speed was obtained through analyzing the hoop tensile stresses under a series of rotating speeds. The results indicate that at the two different temperatures, the influences of fiber volume fractions and reinforced areas on stress level and distribution are different. Some proposals are provided for the structure design of the TMCs ring. With regard to thermal residual stresses, a larger reinforced area is an advisable choice for design of the ring at higher temperature.