弹性体
彈性體
탄성체
CHINA ELASTOMERICS
2014年
6期
70-73
,共4页
郝赫%程凤梅%赵文杰%李海东
郝赫%程鳳梅%趙文傑%李海東
학혁%정봉매%조문걸%리해동
聚丙烯%三元乙丙橡胶%碳酸钙%热塑性弹性体%改性
聚丙烯%三元乙丙橡膠%碳痠鈣%熱塑性彈性體%改性
취병희%삼원을병상효%탄산개%열소성탄성체%개성
PP%EPDM%CaCO3%thermoplastic elastomer%modified
在双螺杆挤出机上采用动态硫化的方法制备CaCO3改性三元乙丙橡胶/聚丙烯(EPDM/PP)共混型热塑性弹性体(TPV),研究了CaCO3添加量对热塑性弹性体拉伸性能、流动性能和邵氏A硬度的影响,并对材料进行热失重分析、差示扫描量热分析以及X射线衍射分析.结果表明:CaCO3对TPV有增强的作用,随着CaCO3含量的增加,热塑性弹性体的拉伸强度和断裂伸长率有很大提高,当CaCO3质量分数为9%时,拉伸强度、断裂伸长率、100%定伸应力与邵氏A硬度达到最大值,随后逐渐降低;CaCO3的加入增加了TPV的流动性,使其热稳定性提高,结晶温度降低,使PP的β(300)晶面消失.
在雙螺桿擠齣機上採用動態硫化的方法製備CaCO3改性三元乙丙橡膠/聚丙烯(EPDM/PP)共混型熱塑性彈性體(TPV),研究瞭CaCO3添加量對熱塑性彈性體拉伸性能、流動性能和邵氏A硬度的影響,併對材料進行熱失重分析、差示掃描量熱分析以及X射線衍射分析.結果錶明:CaCO3對TPV有增彊的作用,隨著CaCO3含量的增加,熱塑性彈性體的拉伸彊度和斷裂伸長率有很大提高,噹CaCO3質量分數為9%時,拉伸彊度、斷裂伸長率、100%定伸應力與邵氏A硬度達到最大值,隨後逐漸降低;CaCO3的加入增加瞭TPV的流動性,使其熱穩定性提高,結晶溫度降低,使PP的β(300)晶麵消失.
재쌍라간제출궤상채용동태류화적방법제비CaCO3개성삼원을병상효/취병희(EPDM/PP)공혼형열소성탄성체(TPV),연구료CaCO3첨가량대열소성탄성체랍신성능、류동성능화소씨A경도적영향,병대재료진행열실중분석、차시소묘량열분석이급X사선연사분석.결과표명:CaCO3대TPV유증강적작용,수착CaCO3함량적증가,열소성탄성체적랍신강도화단렬신장솔유흔대제고,당CaCO3질량분수위9%시,랍신강도、단렬신장솔、100%정신응력여소씨A경도체도최대치,수후축점강저;CaCO3적가입증가료TPV적류동성,사기열은정성제고,결정온도강저,사PP적β(300)정면소실.