机电工程技术
機電工程技術
궤전공정기술
MACHANICAL & ELECTRICAL ENGINEERING TECHNOLOGY
2015年
1期
5-10
,共6页
DELTA机器人%传送带%相机%标定
DELTA機器人%傳送帶%相機%標定
DELTA궤기인%전송대%상궤%표정
DELTA Robot%conveyor%camera%calibration
提出一种关于DELTA机器人传送带与视觉的综合标定方法。通过DELTA机器人臂末端在传送带移动一段距离接触传送带始末同一点,得到该点在机器人坐标系的位置和编码器上对应的读数,得到传送带与机器人的比例因子,确定机器人坐标系与传送带坐标系的转化矩阵,从而得到传动带相对于机器人坐标系的位姿,即传送带的标定。通过相机定位与机器人接触同一点,从而确定相机的内参矩阵与外参矩阵,从而得到机器人与相机坐标系的转换关系,即机器人视觉的标定。DELTA机器人传送带与视觉的标定,为DELTA机器人高精度控制的实现打下基础。
提齣一種關于DELTA機器人傳送帶與視覺的綜閤標定方法。通過DELTA機器人臂末耑在傳送帶移動一段距離接觸傳送帶始末同一點,得到該點在機器人坐標繫的位置和編碼器上對應的讀數,得到傳送帶與機器人的比例因子,確定機器人坐標繫與傳送帶坐標繫的轉化矩陣,從而得到傳動帶相對于機器人坐標繫的位姿,即傳送帶的標定。通過相機定位與機器人接觸同一點,從而確定相機的內參矩陣與外參矩陣,從而得到機器人與相機坐標繫的轉換關繫,即機器人視覺的標定。DELTA機器人傳送帶與視覺的標定,為DELTA機器人高精度控製的實現打下基礎。
제출일충관우DELTA궤기인전송대여시각적종합표정방법。통과DELTA궤기인비말단재전송대이동일단거리접촉전송대시말동일점,득도해점재궤기인좌표계적위치화편마기상대응적독수,득도전송대여궤기인적비례인자,학정궤기인좌표계여전송대좌표계적전화구진,종이득도전동대상대우궤기인좌표계적위자,즉전송대적표정。통과상궤정위여궤기인접촉동일점,종이학정상궤적내삼구진여외삼구진,종이득도궤기인여상궤좌표계적전환관계,즉궤기인시각적표정。DELTA궤기인전송대여시각적표정,위DELTA궤기인고정도공제적실현타하기출。
In this paper we propose an method of integrated calibration on DELTA robot conveyor and vision. We first use the end of DELTA robot arm to touch the same point on the conveyor when the conveyor moves some distance,which allows us to obtain the value of the point’s location in the robot coordinate system and the corresponding value of the encoder.,then we get the scale factor of the robot and conveyor,determine the transformation matrix between the robot coordinate system and the conveyor coordinate system, then we can know the pose of the conveyor coordinate system relative to the coordinate system of the robot,which is the conveyor calibration. By using the camera to posit in contact with the robot at the same point, we obtain the intrinsic matrix and the external parameters matrix of the camera, which can know the transformation matrix between the robot coordinate system and the camera coordinate system, which is the robot vision calibration. DELTA robot conveyor and vision calibration will make the foundation of achieving DELTA robot high-precision control.