失效分析与预防
失效分析與預防
실효분석여예방
FAILURE ANALYSIS AND PREVENTION
2014年
6期
347-351
,共5页
叶序彬%胡本润%林华强%孙琳
葉序彬%鬍本潤%林華彊%孫琳
협서빈%호본윤%림화강%손림
7N01铝合金%温度%缺口敏感度系数%DFR
7N01鋁閤金%溫度%缺口敏感度繫數%DFR
7N01려합금%온도%결구민감도계수%DFR
7N01 aluminum alloy%temperature%notch-sensitivity-factor%DFR
开展了7N01-T4铝合金在实验室空气下室温、100℃和-60℃3种温度条件的疲劳S-N曲线测试,研究了不同温度对7N01-T4铝合金疲劳性能的影响。结果表明:-60℃环境对7N01-T4铝合金疲劳性能是有益的,而100℃环境会降低其疲劳性能;7N01-T4铝合金在室温、100℃和-60℃环境下的缺口敏感度系数分别为0.63、0.60和0.59,这3种温度环境对7N01-T4铝合金敏感度系数基本没有影响;100℃环境Kt =1和Kt =3下的DFR值比室温分别下降24%和16%;-60℃环境Kt =1和Kt =3下的DFR值比室温分别提高42%和14%。
開展瞭7N01-T4鋁閤金在實驗室空氣下室溫、100℃和-60℃3種溫度條件的疲勞S-N麯線測試,研究瞭不同溫度對7N01-T4鋁閤金疲勞性能的影響。結果錶明:-60℃環境對7N01-T4鋁閤金疲勞性能是有益的,而100℃環境會降低其疲勞性能;7N01-T4鋁閤金在室溫、100℃和-60℃環境下的缺口敏感度繫數分彆為0.63、0.60和0.59,這3種溫度環境對7N01-T4鋁閤金敏感度繫數基本沒有影響;100℃環境Kt =1和Kt =3下的DFR值比室溫分彆下降24%和16%;-60℃環境Kt =1和Kt =3下的DFR值比室溫分彆提高42%和14%。
개전료7N01-T4려합금재실험실공기하실온、100℃화-60℃3충온도조건적피로S-N곡선측시,연구료불동온도대7N01-T4려합금피로성능적영향。결과표명:-60℃배경대7N01-T4려합금피로성능시유익적,이100℃배경회강저기피로성능;7N01-T4려합금재실온、100℃화-60℃배경하적결구민감도계수분별위0.63、0.60화0.59,저3충온도배경대7N01-T4려합금민감도계수기본몰유영향;100℃배경Kt =1화Kt =3하적DFR치비실온분별하강24%화16%;-60℃배경Kt =1화Kt =3하적DFR치비실온분별제고42%화14%。
The fatigue S-N curves of 7N01 -T4 aluminum alloy were tested at room temperature, 100℃ and -60℃; the influence of the fatigue properties were investigated in different temperature environment. The test results show that -60℃temperature environment is beneficial to the fatigue property of 7N01-T4 aluminum alloy, and 100℃ temperature environment reduces the fatigue property of 7N01-T4 aluminum alloy. The notch-sensitivity factors of room temperature, 100℃ and -60℃are 0. 62, 0. 60 and 0. 59, respectively. The three kinds of temperature environments don’ t influence the notch-sensitivity factors. The DFR values of Kt =1 and Kt =3 specimens at 100℃ decrease by 24% and 16% respectively compared with room temperature, and the DFR values of Kt =1 and Kt =3 specimens at -60℃ increase by 42% and 14% respectively compared with room temperature.