机电设备
機電設備
궤전설비
MECHANICAL AND ELECTRICAL EQUIPMENT
2014年
6期
38-42
,共5页
逆变器控制%电流控制器%状态反馈%极点配置
逆變器控製%電流控製器%狀態反饋%極點配置
역변기공제%전류공제기%상태반궤%겁점배치
inverter control%current controller%state feedback%pole placement
采用传统控制策略对低脉冲逆变装置的交流电流控制器进行设计时,控制器系统带宽通常会接近系统的基波频率,导致系统动态响应变差。提出了一种改进的电流控制策略,通过状态反馈控制的极点配置方法克服了这一难题,从而大大提高线性控制器的增益。电流控制器的设计以离散条件下的线性状态空间设计为原则,可使控制系统的动态响应和稳定性能更加优越,且系统具有更强的鲁棒性。最后,对设计结果进行了仿真。结果表明,基于状态反馈控制规律的极点配置法所设计的电流控制器比传统的PR设计方案具有更好的动态性能。
採用傳統控製策略對低脈遲逆變裝置的交流電流控製器進行設計時,控製器繫統帶寬通常會接近繫統的基波頻率,導緻繫統動態響應變差。提齣瞭一種改進的電流控製策略,通過狀態反饋控製的極點配置方法剋服瞭這一難題,從而大大提高線性控製器的增益。電流控製器的設計以離散條件下的線性狀態空間設計為原則,可使控製繫統的動態響應和穩定性能更加優越,且繫統具有更彊的魯棒性。最後,對設計結果進行瞭倣真。結果錶明,基于狀態反饋控製規律的極點配置法所設計的電流控製器比傳統的PR設計方案具有更好的動態性能。
채용전통공제책략대저맥충역변장치적교류전류공제기진행설계시,공제기계통대관통상회접근계통적기파빈솔,도치계통동태향응변차。제출료일충개진적전류공제책략,통과상태반궤공제적겁점배치방법극복료저일난제,종이대대제고선성공제기적증익。전류공제기적설계이리산조건하적선성상태공간설계위원칙,가사공제계통적동태향응화은정성능경가우월,차계통구유경강적로봉성。최후,대설계결과진행료방진。결과표명,기우상태반궤공제규률적겁점배치법소설계적전류공제기비전통적PR설계방안구유경호적동태성능。
When AC current controller of low pulse inverter is designed by using the traditional control strategy, the controller system bandwidth usually closes fundamental frequency of the system to lead to the variation of dynamic system response. An improved current control strategy is presented. This problem is overcome by pole placement method of the state feedback control to greatly improve the linear controller gain. Taking the linear state space design under discrete conditions as the principle, the design of current controller can make dynamic response and stable performance of the control system more superior. And the system has stronger robustness. Finally the design results are simulated. The results show that devised current controller based on the pole placement method of the state feedback control law has better dynamic performance compared with that of the traditional PR design scheme.