矿冶工程
礦冶工程
광야공정
2014年
6期
41-44
,共4页
龙渊%张国旺%肖骁%李自强
龍淵%張國旺%肖驍%李自彊
룡연%장국왕%초효%리자강
立式搅拌磨机%磨矿%鳞片石墨
立式攪拌磨機%磨礦%鱗片石墨
입식교반마궤%마광%린편석묵
vertical agitating mill%grinding%flake graphite
采用立式搅拌磨机对鳞片石墨进行了磨矿研究,得出最佳条件为:采用Φ6 mm纳米陶瓷球为磨矿介质,磨机转速100 r/min,磨矿时间4 min,磨矿浓度30%。按此条件下进行4段再磨、4次浮选的闭路试验流程,可获得石墨品位为92.58%、回收率为94?71%、精矿中+0.15 mm粒级含量为56.12%的良好指标。
採用立式攪拌磨機對鱗片石墨進行瞭磨礦研究,得齣最佳條件為:採用Φ6 mm納米陶瓷毬為磨礦介質,磨機轉速100 r/min,磨礦時間4 min,磨礦濃度30%。按此條件下進行4段再磨、4次浮選的閉路試驗流程,可穫得石墨品位為92.58%、迴收率為94?71%、精礦中+0.15 mm粒級含量為56.12%的良好指標。
채용입식교반마궤대린편석묵진행료마광연구,득출최가조건위:채용Φ6 mm납미도자구위마광개질,마궤전속100 r/min,마광시간4 min,마광농도30%。안차조건하진행4단재마、4차부선적폐로시험류정,가획득석묵품위위92.58%、회수솔위94?71%、정광중+0.15 mm립급함량위56.12%적량호지표。
Vertical agitating mill was employed to study the grinding performance of flake graphite, and therewith, mill speed, grinding time and grinding density were optimized as 100 r/min, 4 min and 30%, respectively, while Φ6 mm nanostructured ceramic ball was chosen as the grinding medium. Under the above optimal conditions, a closed?circuit flowsheet consisting of four?stage regrinding and four?stage flotation resulted in a concentrate with 92.58% graphite grade at 94.71% recovery and 56.12% in +0.15 mm fraction.