广东农业科学
廣東農業科學
엄동농업과학
GUANGDONG AGRICULTURAL SCIENCES
2015年
1期
18-21,31
,共5页
宋岩%黄维%王道波%申希兵%文望名
宋巖%黃維%王道波%申希兵%文望名
송암%황유%왕도파%신희병%문망명
红麻%耕作方式%施氮方式%纤维产量%纤维品质
紅痳%耕作方式%施氮方式%纖維產量%纖維品質
홍마%경작방식%시담방식%섬유산량%섬유품질
以常规红麻常规栽培种福红992为试材,设免耕(A)、垄耕(B)、深松耕(粉垄,C)3种耕作方式与T1(20%作基肥,80%作追肥)、T2(40%作基肥,60%作追肥)、T3(60%作基肥,40%作追肥)3种施氮方式共9个处理,分别为AT1、AT2、AT3、BT1、BT2、BT3、CT1、CT2、CT3,探讨不同耕作和施氮方式对红麻产量和纤维品质的影响,为红麻高产高效栽培提供合理的耕作和施肥依据.结果表明:(1)深松耕的耕作方式与20%作基肥、80%作追肥的施氮方式互作时,红麻的纤维产量和种子产量均达到最大值;(2)与免耕相比,深松耕的纤维产量、种子产量和纤维强力分别增加17.0%、14.8%和18.4%,线密度降低15.9%,深松耕可显著提高红麻产量和纤维品质;(3)与T1相比,T2的纤维产量、种子产量和纤维强力分别增加17.1%、30.8%和17.6%,线密度降低17.3%,适当增加氮基肥的比例可以增加红麻的产量和纤维品质.因此,采用深松耕结合20%N肥作基肥,福红992的纤维产量最高,同时兼收的种子质量也达到最大值.
以常規紅痳常規栽培種福紅992為試材,設免耕(A)、壟耕(B)、深鬆耕(粉壟,C)3種耕作方式與T1(20%作基肥,80%作追肥)、T2(40%作基肥,60%作追肥)、T3(60%作基肥,40%作追肥)3種施氮方式共9箇處理,分彆為AT1、AT2、AT3、BT1、BT2、BT3、CT1、CT2、CT3,探討不同耕作和施氮方式對紅痳產量和纖維品質的影響,為紅痳高產高效栽培提供閤理的耕作和施肥依據.結果錶明:(1)深鬆耕的耕作方式與20%作基肥、80%作追肥的施氮方式互作時,紅痳的纖維產量和種子產量均達到最大值;(2)與免耕相比,深鬆耕的纖維產量、種子產量和纖維彊力分彆增加17.0%、14.8%和18.4%,線密度降低15.9%,深鬆耕可顯著提高紅痳產量和纖維品質;(3)與T1相比,T2的纖維產量、種子產量和纖維彊力分彆增加17.1%、30.8%和17.6%,線密度降低17.3%,適噹增加氮基肥的比例可以增加紅痳的產量和纖維品質.因此,採用深鬆耕結閤20%N肥作基肥,福紅992的纖維產量最高,同時兼收的種子質量也達到最大值.
이상규홍마상규재배충복홍992위시재,설면경(A)、롱경(B)、심송경(분롱,C)3충경작방식여T1(20%작기비,80%작추비)、T2(40%작기비,60%작추비)、T3(60%작기비,40%작추비)3충시담방식공9개처리,분별위AT1、AT2、AT3、BT1、BT2、BT3、CT1、CT2、CT3,탐토불동경작화시담방식대홍마산량화섬유품질적영향,위홍마고산고효재배제공합리적경작화시비의거.결과표명:(1)심송경적경작방식여20%작기비、80%작추비적시담방식호작시,홍마적섬유산량화충자산량균체도최대치;(2)여면경상비,심송경적섬유산량、충자산량화섬유강력분별증가17.0%、14.8%화18.4%,선밀도강저15.9%,심송경가현저제고홍마산량화섬유품질;(3)여T1상비,T2적섬유산량、충자산량화섬유강력분별증가17.1%、30.8%화17.6%,선밀도강저17.3%,괄당증가담기비적비례가이증가홍마적산량화섬유품질.인차,채용심송경결합20%N비작기비,복홍992적섬유산량최고,동시겸수적충자질량야체도최대치.