价值工程
價值工程
개치공정
VALUE ENGINEERING
2015年
2期
13-15
,共3页
投入产出法%用电系数%差异性
投入產齣法%用電繫數%差異性
투입산출법%용전계수%차이성
input-output method%using electricity coefficient%differences
利用江苏和广东二分位行业用电数据,构造电力消耗投入产出模型,对比分析江苏和广东行业间用电差异性。结果显示:①燃气生产供应业、建筑业等行业在广东和江苏都处于“低”直接用电系数类但广东和江苏差异性较大,“中”直接用电系数类中江苏和广东直接用电系数差异性相对较小,“高”直接用电系数类中江苏直接用电系数普遍高于广东;②江苏和广东完全用电系数差别较大和较小行业个数各占总行业数一半左右,完全用电系数差别较小的行业集中于劳动密集型产业和高端制造业;③两省各行业完全用电系数都高于直接用电系数,完全用电系数差别较大的行业在广东和江苏并不相同。
利用江囌和廣東二分位行業用電數據,構造電力消耗投入產齣模型,對比分析江囌和廣東行業間用電差異性。結果顯示:①燃氣生產供應業、建築業等行業在廣東和江囌都處于“低”直接用電繫數類但廣東和江囌差異性較大,“中”直接用電繫數類中江囌和廣東直接用電繫數差異性相對較小,“高”直接用電繫數類中江囌直接用電繫數普遍高于廣東;②江囌和廣東完全用電繫數差彆較大和較小行業箇數各佔總行業數一半左右,完全用電繫數差彆較小的行業集中于勞動密集型產業和高耑製造業;③兩省各行業完全用電繫數都高于直接用電繫數,完全用電繫數差彆較大的行業在廣東和江囌併不相同。
이용강소화엄동이분위행업용전수거,구조전력소모투입산출모형,대비분석강소화엄동행업간용전차이성。결과현시:①연기생산공응업、건축업등행업재엄동화강소도처우“저”직접용전계수류단엄동화강소차이성교대,“중”직접용전계수류중강소화엄동직접용전계수차이성상대교소,“고”직접용전계수류중강소직접용전계수보편고우엄동;②강소화엄동완전용전계수차별교대화교소행업개수각점총행업수일반좌우,완전용전계수차별교소적행업집중우노동밀집형산업화고단제조업;③량성각행업완전용전계수도고우직접용전계수,완전용전계수차별교대적행업재엄동화강소병불상동。
Using industry electricity consumption data, this paper comparativly analyses the differences of electricity-consumption between Jiangsu and Guangdong industries. Results show that: ①gas production and supply industry, construction and other industries in Jiangsu and Guangdong are ranked to the lowest direct using electricity coefficient industry class and the differences of direct using electricity coefficient in Jiangsu and Guangdong are obvious. Direct using electricity coefficients of Jiangsu are generally higher than that of Guangdong among the highest direct using electricity coefficient class; ②electricity coefficients are greatly different from each other and have small differences are half of the total number of industries. Industries using electricity coefficients have small differences concentrated in labor-intensive industries and high-end manufacturing; ③full using electricity coefficients are higher than direct using electricity coefficients among industries and the above industries are also different in Jiangsu and Guangdong.