化学分析计量
化學分析計量
화학분석계량
CHEMICAL ANALYSIS AND METERAGE
2014年
z1期
19-21
,共3页
周巧丽%卢丽君%王国华%廖海星%薛改凤%朱丽华
週巧麗%盧麗君%王國華%廖海星%薛改鳳%硃麗華
주교려%로려군%왕국화%료해성%설개봉%주려화
硫酸钙%置换沉淀提取法%离子色谱%硫酸根%脱硫灰渣%石膏
硫痠鈣%置換沉澱提取法%離子色譜%硫痠根%脫硫灰渣%石膏
류산개%치환침정제취법%리자색보%류산근%탈류회사%석고
calcium sulphate%substitution precipitation%anionic chromatography%sulfate ions%desulfurization ash%gypsum
用碳酸钠将硫酸钙样品中的钙沉淀为碳酸钙,释放出硫酸根,用阴离子型离子色谱仪,在40℃柱温下,以6.3 mmol/L NaHCO3–1.7 mmol/L Na2CO3缓冲盐为淋洗液,采用电导检测器测定其中硫酸根的浓度,以间接得到硫酸钙含量。实验结果表明,该法与经典的沉淀重量法测定结果相吻合,两者之间的相对误差为0.29%。样品加标回收率在96.0%~105.3%之间,测定结果的相对标准偏差为0.26%(n=6)。该方法精密度与准确度高,可快速、稳定、可靠地分析脱硫灰渣及石膏样品中的硫酸根含量。
用碳痠鈉將硫痠鈣樣品中的鈣沉澱為碳痠鈣,釋放齣硫痠根,用陰離子型離子色譜儀,在40℃柱溫下,以6.3 mmol/L NaHCO3–1.7 mmol/L Na2CO3緩遲鹽為淋洗液,採用電導檢測器測定其中硫痠根的濃度,以間接得到硫痠鈣含量。實驗結果錶明,該法與經典的沉澱重量法測定結果相吻閤,兩者之間的相對誤差為0.29%。樣品加標迴收率在96.0%~105.3%之間,測定結果的相對標準偏差為0.26%(n=6)。該方法精密度與準確度高,可快速、穩定、可靠地分析脫硫灰渣及石膏樣品中的硫痠根含量。
용탄산납장류산개양품중적개침정위탄산개,석방출류산근,용음리자형리자색보의,재40℃주온하,이6.3 mmol/L NaHCO3–1.7 mmol/L Na2CO3완충염위림세액,채용전도검측기측정기중류산근적농도,이간접득도류산개함량。실험결과표명,해법여경전적침정중량법측정결과상문합,량자지간적상대오차위0.29%。양품가표회수솔재96.0%~105.3%지간,측정결과적상대표준편차위0.26%(n=6)。해방법정밀도여준학도고,가쾌속、은정、가고지분석탈류회사급석고양품중적류산근함량。
Calcium sulphate in the sample was converted into calcium carbonate by using sodium carbonate,which released sulfate ions into solutions. The released sulfate ions were determined by an conductivity detector with anionic ion chromatography at 40℃,with the buffer of 6.3 mmol/L NaHCO3–1.7 mmol/L Na2CO3 solution. It was found that the result obtained by the anionic ion chromatography was very close to that obtained with the classic precipitation method, and the relative error between the two methods was only 0.29%. The new method yielded recoveries between 96.0% and 105.3% with RSD of 0.26% (n=6). The method can determine thecontent of sulfate in the sample of the desulfurization ash and gypsum,with high precision and accuracy,as well as being fast,stable and reliable.