兰州理工大学学报
蘭州理工大學學報
란주리공대학학보
JOURNAL OF LANZHOU UNIVERSITY OF TECHNOLOGY
2014年
6期
9-13
,共5页
肖荣振%朱昶胜%安国升%冯力%王智平
肖榮振%硃昶勝%安國升%馮力%王智平
초영진%주창성%안국승%풍력%왕지평
相场法%二元合金%定向凝固%界面形态%海藻晶
相場法%二元閤金%定嚮凝固%界麵形態%海藻晶
상장법%이원합금%정향응고%계면형태%해조정
phase-field method%binary alloy%directional solidification%interfacial morphology%seaweed crystal
利用微观组织相场法数值模拟技术,对Ni-Cu二元合金在温度梯度G=20 K/cm条件下定向凝固的界面形态演化过程进行模拟仿真.基于均匀网格的有限差分法,采用C语言编制定向凝固晶体生长的相场法数值模拟程序,研究计算参数对凝固组织的影响,探讨定向凝固过程晶体的生长机制.研究结果表明:低的温度梯度条件下,初始平界面一旦失稳,快速形成胞状组织,在随后的演化过程中,侧向分支大量繁殖、尖端分裂,形成海藻状生长形态.因此,低温度梯度下二元合金定向凝固界面形态的转化形式为:平面状向胞状转变,最后转变为海藻状.
利用微觀組織相場法數值模擬技術,對Ni-Cu二元閤金在溫度梯度G=20 K/cm條件下定嚮凝固的界麵形態縯化過程進行模擬倣真.基于均勻網格的有限差分法,採用C語言編製定嚮凝固晶體生長的相場法數值模擬程序,研究計算參數對凝固組織的影響,探討定嚮凝固過程晶體的生長機製.研究結果錶明:低的溫度梯度條件下,初始平界麵一旦失穩,快速形成胞狀組織,在隨後的縯化過程中,側嚮分支大量繁殖、尖耑分裂,形成海藻狀生長形態.因此,低溫度梯度下二元閤金定嚮凝固界麵形態的轉化形式為:平麵狀嚮胞狀轉變,最後轉變為海藻狀.
이용미관조직상장법수치모의기술,대Ni-Cu이원합금재온도제도G=20 K/cm조건하정향응고적계면형태연화과정진행모의방진.기우균균망격적유한차분법,채용C어언편제정향응고정체생장적상장법수치모의정서,연구계산삼수대응고조직적영향,탐토정향응고과정정체적생장궤제.연구결과표명:저적온도제도조건하,초시평계면일단실은,쾌속형성포상조직,재수후적연화과정중,측향분지대량번식、첨단분렬,형성해조상생장형태.인차,저온도제도하이원합금정향응고계면형태적전화형식위:평면상향포상전변,최후전변위해조상.