医用生物力学
醫用生物力學
의용생물역학
JOURNAL OF MEDICAL BIOMECHANICS
2014年
6期
536-542
,共7页
X线片%定制型假体%股骨柄假体%图像处理
X線片%定製型假體%股骨柄假體%圖像處理
X선편%정제형가체%고골병가체%도상처리
X-ray film%Customized prosthesis%Hip stem prosthesis%Image processing
目的 介绍自编的基于X线片设计定制型股骨柄假体程序系统的设计原理及功能模块.方法 利用图像处理方法提取X线片上一些患者股骨解剖特征点(如小粗隆最高点、股骨头中心及转子间窝等)、2个规划的手术截骨位置点(大粗隆侧截骨边界位置点及截骨线最低点位置点)以及一些设计用关键位置点(如假体远端位置、假体颈干连接段最高点位置等),以此预测患者股骨近端髓腔,并通过输入设计参数值(如颈干角、前倾角、预留的松质骨厚度、假体匹配段截面圆弧半径及假体过渡段高度等)设计出定制型股骨柄假体.并对设计出的定制股骨柄假体进行匹配区域多个截面的二维截面验证和三维的总体验证.结果 根据验证情况,调整设计参数重新生成股骨柄假体模型点云数据,使设计出的股骨柄假体与患者股骨腔相匹配,达到定制型假体设计要求.结论 介绍的程序系统可用于为患者设计定制型股骨柄假体,设计周期较短,成本较低,有利于促进定制型股骨柄假体在临床上的应用,进一步提高患者的生活质量.
目的 介紹自編的基于X線片設計定製型股骨柄假體程序繫統的設計原理及功能模塊.方法 利用圖像處理方法提取X線片上一些患者股骨解剖特徵點(如小粗隆最高點、股骨頭中心及轉子間窩等)、2箇規劃的手術截骨位置點(大粗隆側截骨邊界位置點及截骨線最低點位置點)以及一些設計用關鍵位置點(如假體遠耑位置、假體頸榦連接段最高點位置等),以此預測患者股骨近耑髓腔,併通過輸入設計參數值(如頸榦角、前傾角、預留的鬆質骨厚度、假體匹配段截麵圓弧半徑及假體過渡段高度等)設計齣定製型股骨柄假體.併對設計齣的定製股骨柄假體進行匹配區域多箇截麵的二維截麵驗證和三維的總體驗證.結果 根據驗證情況,調整設計參數重新生成股骨柄假體模型點雲數據,使設計齣的股骨柄假體與患者股骨腔相匹配,達到定製型假體設計要求.結論 介紹的程序繫統可用于為患者設計定製型股骨柄假體,設計週期較短,成本較低,有利于促進定製型股骨柄假體在臨床上的應用,進一步提高患者的生活質量.
목적 개소자편적기우X선편설계정제형고골병가체정서계통적설계원리급공능모괴.방법 이용도상처리방법제취X선편상일사환자고골해부특정점(여소조륭최고점、고골두중심급전자간와등)、2개규화적수술절골위치점(대조륭측절골변계위치점급절골선최저점위치점)이급일사설계용관건위치점(여가체원단위치、가체경간련접단최고점위치등),이차예측환자고골근단수강,병통과수입설계삼수치(여경간각、전경각、예류적송질골후도、가체필배단절면원호반경급가체과도단고도등)설계출정제형고골병가체.병대설계출적정제고골병가체진행필배구역다개절면적이유절면험증화삼유적총체험증.결과 근거험증정황,조정설계삼수중신생성고골병가체모형점운수거,사설계출적고골병가체여환자고골강상필배,체도정제형가체설계요구.결론 개소적정서계통가용우위환자설계정제형고골병가체,설계주기교단,성본교저,유리우촉진정제형고골병가체재림상상적응용,진일보제고환자적생활질량.