红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2015年
4期
1105-1109
,共5页
张鑫%刘源%贺岩%杨燕%侯霞%陈卫标
張鑫%劉源%賀巖%楊燕%侯霞%陳衛標
장흠%류원%하암%양연%후하%진위표
激光器%光纤光学%主振荡-功率放大%单模输出%三维成像
激光器%光纖光學%主振盪-功率放大%單模輸齣%三維成像
격광기%광섬광학%주진탕-공솔방대%단모수출%삼유성상
laser%fiber optics%master oscillator power amplification%single mode output%three-dimensional imaging
介绍了基于主振荡功率放大结构的人眼安全全光纤激光器。首先对比了电光调制及直接调制产生的种子激光在百kHz重复频率、纳秒级脉冲宽度的激光放大器中优缺点,综合系统需求选择直接调制方式;之后对窄脉冲单模放大中出现的脉冲分裂现象进行了研究,选用10μm纤芯的双包层铒镱共掺光纤,仅通过两级放大即获得了1550 nm,重复频率为200 kHz,脉冲宽度为4.07 ns,峰值功率为1.02 kW的单模激光输出。具有结构紧凑、稳定可靠的特点,可用于三维视频激光雷达。
介紹瞭基于主振盪功率放大結構的人眼安全全光纖激光器。首先對比瞭電光調製及直接調製產生的種子激光在百kHz重複頻率、納秒級脈遲寬度的激光放大器中優缺點,綜閤繫統需求選擇直接調製方式;之後對窄脈遲單模放大中齣現的脈遲分裂現象進行瞭研究,選用10μm纖芯的雙包層鉺鐿共摻光纖,僅通過兩級放大即穫得瞭1550 nm,重複頻率為200 kHz,脈遲寬度為4.07 ns,峰值功率為1.02 kW的單模激光輸齣。具有結構緊湊、穩定可靠的特點,可用于三維視頻激光雷達。
개소료기우주진탕공솔방대결구적인안안전전광섬격광기。수선대비료전광조제급직접조제산생적충자격광재백kHz중복빈솔、납초급맥충관도적격광방대기중우결점,종합계통수구선택직접조제방식;지후대착맥충단모방대중출현적맥충분렬현상진행료연구,선용10μm섬심적쌍포층이의공참광섬,부통과량급방대즉획득료1550 nm,중복빈솔위200 kHz,맥충관도위4.07 ns,봉치공솔위1.02 kW적단모격광수출。구유결구긴주、은정가고적특점,가용우삼유시빈격광뢰체。
An eye-safe, all fiber, single mode, fiber laser based on master oscillator power amplifier configuration was presented. The advantages and disadvantages were compared between using a directly modulated diode laser and an electro-optical modulated continuous-wave diode as seed laser in sub-Mega Hertz, nanosecond fiber amplifier. The main restriction of power scaling in nanosecond fiber laser was pulse split. 10μm core double cladding erbium ytterbium co-doped fiber was employed as gain fiber of power amplifier. The directly modulated seed laser was then amplified by only two stage amplifiers. Finally, a peak power of 1.02 kW with 4.07 ns pulse duration at 200 kHz pulse repetition frequency with single-mode output was obtained and it is applicable in three dimensional video imaging lidar system.