CAJ | 학술논문

有机激光器因其制备简单，价格低廉和易于集成等优势，一直以来备受科研工作者的关注。与无机激光介质相比，有机激光材料来源广泛，并具有发射光谱宽，吸收与发射截面积大等特性，因而有很大的发展潜力。本文从激光的基本原理出发，对有机激光材料的种类、特性进行了归纳，并总结了高效有机激光材料的普遍特征；分类讨论了常见有机激光微腔的类型与特点，对有机激光系统内增益与损耗之间的动态关系进行了探讨。鉴于实现电抽运激光一直以来都是有机激光领域期待解决的难题，本文重点讨论了当前电抽运有机激光的研究现状和发展瓶颈，以及科研工作者们对此问题的不懈探索和已有的工作基础。最后总结了光抽运有机激光近年来的总体进展，未来的研究方向，这对于读者拓展新的研究思路有很好的参考和借鉴意义。
유궤격광기인기제비간단，개격저렴화역우집성등우세，일직이래비수과연공작자적관주。여무궤격광개질상비，유궤격광재료래원엄범，병구유발사광보관，흡수여발사절면적대등특성，인이유흔대적발전잠력。본문종격광적기본원리출발，대유궤격광재료적충류、특성진행료귀납，병총결료고효유궤격광재료적보편특정；분류토론료상견유궤격광미강적류형여특점，대유궤격광계통내증익여손모지간적동태관계진행료탐토。감우실현전추운격광일직이래도시유궤격광영역기대해결적난제，본문중점토론료당전전추운유궤격광적연구현상화발전병경，이급과연공작자문대차문제적불해탐색화이유적공작기출。최후총결료광추운유궤격광근년래적총체진전，미래적연구방향，저대우독자탁전신적연구사로유흔호적삼고화차감의의。
Laser has been widely applied in the scientific and industrial areas, including materials, medicine, military and telecommunications, due to its extremely well-defined frequency, narrow divergence and high intensity. In recent fifty years, various laser sources have been developed. The laser output power, pulse duration, and attainable wavelengths have been greatly improved. To date, further optimization on laser is mainly focused on the three aspects: an effective gain medium capable of amplifying light, a convenient pump source, and a high e?cient resonator (or cavity). Among these aspects, the gain medium plays a very important role in the generation of e?cient and high-quality laser. Lots of laser materials have been explored and developed, among them, organic laser materials, small molecules or polymers based on π-conjugated structure, have been attracting more and more attention in the current research of high e?ciency laser. Organic laser have advantages such as simple fabrication, low cost, easy integration, and so on. Although the organic lasers with optical pump source have been extensively researched, the issues how to achieve electrically pumped organic lasers, or the so-called organic laser diodes, still remain unsolved. Nevertheless, the prospects of organic laser are very promising, such as its application in spectroscopy, chemical sensor (e.g. trinitrotoluene or DNA sequences) and short-haul data communication. In this review, we try to draw a picture of the organic laser research form its first appearence till the end of 2014, with emphasis on the latest progress and variation trends, instead of providing a complete survey of organic laser research. In the first part of this paper, different types of organic materials used for lasers are briefly reviewed. First, basic rules for the selection of suitable materials for organic lasing are summaried as:1) the appropriate energy level distribution for creating four-level systems; 2) a high-stimulated emission cross-sectionσe, which should affect the gain and threshold; 3) an appropriate radius for host-guest blend if energy transfer system is applied; 4) the low stokes shift to reduce the pump energy converted into heat; 5) a low excited-state absorption to reduce the self-absorbance loss; 6) a low intersystem crossing rate and a low triplet–triplet absorption cross-section to eventually lower the triplet lifetime; 7) a high photoluminescence e?ciency in solid-state, i.e. a low π-π packing; 8) the good stability against oxygen and moisture and photo stability against pump light. Such organic gain media are classified into dyes, semiconductors, and new-concept materials. The active host-guest system is also discussed, which is different from the dispersion chromophore in the inert matrix (e.g. PMMA). This energy transfer strategy has been well proved to be effective to improve the absorption of pump energy and move the absorption band away from the emission band. It is possible, therefore, to reduce the self-absorbance loss to lower the threshold of lasing. <br> In the second part, different geometries and features of the most commonly used cavity are discussed to investigate the dynamic balance between the gain and loss inside the lasing operating system. We divide the resonator structures into the catalogs of planar waveguides, curved surface cavities, and vertical external cavity solid organic larers (VECSOL). The widely used types of planar waveguides are DFB and DBR. The lasing thresholds of these structures are extremely low and their emission wavelength can be tuned by changing the thickness of the organic layer or the period of the modulation. In the third part, current progress and future research direction of the organic lasers are summarized. The challenge of electrically pumped organic laser (or organic laser diode) remains to be the major driving force for the scientific community to be devoted to the research of organic lasers. Estimation of operating current based on the optical-pumped laser data is only 100 Acm?2. Actually, very high current densities of the order of kA cm?2 (even higher) have been realized both in pulsed OLEDs and light-emitting field-effect transistor (LEFET) devices. But lasing is still not observed. The extra losses brought about by electrical driving can be summarized as follows: 1) the electrodes used for electrical injection;2) the charge carriers with broad absorption bands overlapping the emission;3) the triplet excitons with longer lifetime and higher creation probability ratio. LEFET is now the most promising device structure of organic laser diodes. Unfortunately, LEFET is not applicable for dealing with the triplet trouble which is inherent in the organic materials. The proposition of new concept on directly pumped organic lasers seems to be an alternative way to solve this problem. Finally, we would like to describe the recent progress in optically pumped organic lasers briefly. Efforts which have been made can be summarized as follows: lowering the lasing threshold, increasing the wavelength coverage (to the deep red or infrared and to the ultraviolet), improving the wavelength sensitivity, enhancing the lifetime of the devices, or improving the conversion e?ciency, output power and beam quality. Although these progresses are realized under the condition of optical pumping, all these achievements are meaningful since they constitute the bases of future organic laser diodes.