CAJ | 학술논문

对比分析了HT200和QT600－6两种材质铸模在铁合金清洁生产线上使用前后组织和性能的变化，结果表明：HT200铸模使用后组织中珠光体形态发生了变化，碳有团聚趋势，硬度略有降低，抗拉强度基本不变；QT600－6铸模在使用后组织由铁素体－珠光体基向珠光体基转变，硬度略有提高，抗拉强度基本不变；QT600－6铸模应用前后性能均优于HT200铸模。
대비분석료HT200화QT600－6량충재질주모재철합금청길생산선상사용전후조직화성능적변화，결과표명：HT200주모사용후조직중주광체형태발생료변화，탄유단취추세，경도략유강저，항랍강도기본불변；QT600－6주모재사용후조직유철소체－주광체기향주광체기전변，경도략유제고，항랍강도기본불변；QT600－6주모응용전후성능균우우HT200주모。
This paper analyzed the change of microstructure and mechanical properties of the HT200 and QT600-6 mold that were used on ferroalloy clean production line, the results showed that after been used on the ferroalloy clean production line, the pearlite shape in the organization of HT200 mold was changed, the graphite and ferrite had a tendency to reunite, and its hardness decreased slightly, yet its tensile strength remained unchanged;while the organization of QT600-6 mold turned from the ferrite-pearlite base to the pearlite base after been used on the ferroalloy clean production line, and its hardness improved slightly, yet its tensile strength basically remain unchanged.The performance of QT600-6 mold was better than that of HT200 mold after been used on the ferroalloy clean production line.