中国冶金
中國冶金
중국야금
CHINA METALLURGY
2015年
4期
37-40
,共4页
朱晓岩%张殿华%王力%孙杰
硃曉巖%張殿華%王力%孫傑
주효암%장전화%왕력%손걸
破鳞拉矫机%伸长率%张力模型%静态误差
破鱗拉矯機%伸長率%張力模型%靜態誤差
파린랍교궤%신장솔%장력모형%정태오차
tension leveler%elongation%tension model%static error
酸轧联合机组生产过程中,破鳞拉矫机在变规格、换辊后会出现张力设定精度低,导致伸长率控制精度低的情况,影响酸洗效果。为解决此问题,提出了新的张力计算模型,并引入模型静态误差的概念,对破鳞拉矫机张力模型进行了优化改进。现场实际应用效果表明:破鳞拉矫机换辊后,首条带钢的张力设定精度偏差平均值由原来的4.477%降低到1.798%,明显提高了伸长率控制能力。并给出了张力模型静态误差的普遍求解方案,模型在线使用效果良好,适于工业推广。
痠軋聯閤機組生產過程中,破鱗拉矯機在變規格、換輥後會齣現張力設定精度低,導緻伸長率控製精度低的情況,影響痠洗效果。為解決此問題,提齣瞭新的張力計算模型,併引入模型靜態誤差的概唸,對破鱗拉矯機張力模型進行瞭優化改進。現場實際應用效果錶明:破鱗拉矯機換輥後,首條帶鋼的張力設定精度偏差平均值由原來的4.477%降低到1.798%,明顯提高瞭伸長率控製能力。併給齣瞭張力模型靜態誤差的普遍求解方案,模型在線使用效果良好,適于工業推廣。
산알연합궤조생산과정중,파린랍교궤재변규격、환곤후회출현장력설정정도저,도치신장솔공제정도저적정황,영향산세효과。위해결차문제,제출료신적장력계산모형,병인입모형정태오차적개념,대파린랍교궤장력모형진행료우화개진。현장실제응용효과표명:파린랍교궤환곤후,수조대강적장력설정정도편차평균치유원래적4.477%강저도1.798%,명현제고료신장솔공제능력。병급출료장력모형정태오차적보편구해방안,모형재선사용효과량호,괄우공업추엄。
In the continuous pickling line and tandem cold rolling,elongation and tension were out of the precise con-trol level when tension-leveler flying gauge changed or roll changed,which affected the pickling quality.To solve this problem,a new tension model was proposed,and the steady state error was put into the model to improve the tension-leveler model accuracy.Practical application results show that the average tension deviation of the first coil strip dropped from 4.477% to 1.798% after changing roll,which greatly improved the elongation control level.The generic solution of the steady state error in the tension model was provided.The proposed model was used properly on-line for a long time which was suitable for industrial promotion.