中国冶金
中國冶金
중국야금
CHINA METALLURGY
2015年
4期
33-36
,共4页
辛彩萍%岳峰%蒋晨旭%吴启帆
辛綵萍%嶽峰%蔣晨旭%吳啟帆
신채평%악봉%장신욱%오계범
顶渣%帘线钢%夹杂物%塑性
頂渣%簾線鋼%夾雜物%塑性
정사%렴선강%협잡물%소성
top slag%tire cord steel%inclusion%plasticity
以某钢厂生产的帘线钢铸坯试样为原料,使用硅钼棒炉对其进行顶渣熔炼实验,研究顶渣成分对 CaO-Al2 O3-SiO2类夹杂物塑性化的影响。结果表明,在顶渣碱度为0.8~1.2时,随着顶渣中 Al2 O3质量分数的增加夹杂物中的 Al2 O3质量分数也随之增加。当顶渣中 Al2 O3质量分数低于10%时,CaO-Al2 O3-SiO2类夹杂物的成分在塑性区范围,对应的此时钢液中的 w [Al]s 低于8×10-6。通过控制顶渣的成分可以把 CaO-Al2 O3-SiO2类夹杂物的成分控制在塑性区内。
以某鋼廠生產的簾線鋼鑄坯試樣為原料,使用硅鉬棒爐對其進行頂渣鎔煉實驗,研究頂渣成分對 CaO-Al2 O3-SiO2類夾雜物塑性化的影響。結果錶明,在頂渣堿度為0.8~1.2時,隨著頂渣中 Al2 O3質量分數的增加夾雜物中的 Al2 O3質量分數也隨之增加。噹頂渣中 Al2 O3質量分數低于10%時,CaO-Al2 O3-SiO2類夾雜物的成分在塑性區範圍,對應的此時鋼液中的 w [Al]s 低于8×10-6。通過控製頂渣的成分可以把 CaO-Al2 O3-SiO2類夾雜物的成分控製在塑性區內。
이모강엄생산적렴선강주배시양위원료,사용규목봉로대기진행정사용련실험,연구정사성분대 CaO-Al2 O3-SiO2류협잡물소성화적영향。결과표명,재정사감도위0.8~1.2시,수착정사중 Al2 O3질량분수적증가협잡물중적 Al2 O3질량분수야수지증가。당정사중 Al2 O3질량분수저우10%시,CaO-Al2 O3-SiO2류협잡물적성분재소성구범위,대응적차시강액중적 w [Al]s 저우8×10-6。통과공제정사적성분가이파 CaO-Al2 O3-SiO2류협잡물적성분공제재소성구내。
By top slag melting experiment in which tire cord steel billet of certain steel plant was used as raw material performed in a silicon molybdenum furnace,the influence of top slag components on the plasticity of CaO-Al2 O3-SiO2 inclusions was studied.Results show that the content of Al2 O3 in inclusions increased with the content of Al2 O3 in top slag when the basicity of top slags ranged from 0.8 to 1.2.When the content of Al2 O3 in top slag was less than 2%,the w [Al]s in steel was below 8×10 -6 to make sure that the content of CaO-Al2 O3-SiO2 inclusions was in the plasticity region.With the control of content of top slag,the content of CaO-Al2 O3-SiO2 inclusions can be controlled in the plasticity region.