绝缘材料
絕緣材料
절연재료
INSULATING MATERIALS
2015年
4期
8-13
,共6页
何子海%虞锦洪%江南%曾岑%潘露云%陆绍荣
何子海%虞錦洪%江南%曾岑%潘露雲%陸紹榮
하자해%우금홍%강남%증잠%반로운%륙소영
环氧树脂%功能化氮化硼%液晶%导热系数
環氧樹脂%功能化氮化硼%液晶%導熱繫數
배양수지%공능화담화붕%액정%도열계수
epoxy resin%functionalized boron nitride%liquid crystal%thermal conductivity
通过合成液晶与BN纳米片共混超声而制得功能化氮化硼纳米片(BN-LCP),然后采用该功能化氮化硼纳米片制备了环氧树脂/BN-LCP复合材料,并对其热性能进行研究。结果表明:加入功能化氮化硼纳米片后,环氧树脂/BN-LCP复合材料的初始储能模量比纯环氧树脂提高了748 MPa,玻璃化转变温度提高29℃;随着BN-LCP填充量的增加,复合材料的线膨胀系数逐渐减小,导热系数增大。
通過閤成液晶與BN納米片共混超聲而製得功能化氮化硼納米片(BN-LCP),然後採用該功能化氮化硼納米片製備瞭環氧樹脂/BN-LCP複閤材料,併對其熱性能進行研究。結果錶明:加入功能化氮化硼納米片後,環氧樹脂/BN-LCP複閤材料的初始儲能模量比純環氧樹脂提高瞭748 MPa,玻璃化轉變溫度提高29℃;隨著BN-LCP填充量的增加,複閤材料的線膨脹繫數逐漸減小,導熱繫數增大。
통과합성액정여BN납미편공혼초성이제득공능화담화붕납미편(BN-LCP),연후채용해공능화담화붕납미편제비료배양수지/BN-LCP복합재료,병대기열성능진행연구。결과표명:가입공능화담화붕납미편후,배양수지/BN-LCP복합재료적초시저능모량비순배양수지제고료748 MPa,파리화전변온도제고29℃;수착BN-LCP전충량적증가,복합재료적선팽창계수축점감소,도열계수증대。
A functionalized boron nitride (BN-LCP) was prepared by ultrasonic mixing the synthsized liquid crystal and boron nitride nanoplatelets, and a BN-LCP/epoxy resin composite were prepared through adding the BN-LCP into epoxy resin matrix. The effects of functionalized BN nanoparticles on the thermal property of epoxy composite were studied. The results show that the initial storage modulus and glass transition temperature of the BN-LCP/epoxy composite increases by 748 MPa and 29 ℃respectively comparied with the neat epoxy resin. With the increase of the BN-LCP content, the linear thermal expansion coefficient of the composite decreases gradually, and the thermal conductivity increases from 0.16 W/(m·K) to 0.308 W/(m·K).