计算机集成制造系统
計算機集成製造繫統
계산궤집성제조계통
COMPUTER INTEGRATED MANUFACTURING SYSTEMS
2015年
3期
709-715
,共7页
谐波齿轮%渐开线齿廓%空间齿廓%共轭齿廓%放样
諧波齒輪%漸開線齒廓%空間齒廓%共軛齒廓%放樣
해파치륜%점개선치곽%공간치곽%공액치곽%방양
harmonic gear%involute tooth profile%spatial tooth profile%conjugate tooth profile%lofting
针对杯形柔轮在波发生器作用下的锥度变形特征造成垂直于回转轴的横截面内中面变形曲线差异的问题,设计刚轮空间齿廓以提高谐波齿轮的啮合性能.基于杯形柔轮的空间变性特征,将刚轮空间齿廓设计转化为垂直于轴线的多个横截面内的平面齿廓设计.设计了与变形后的柔轮齿廓实现空间啮合的刚轮空间齿廓设计方法,及其啮合齿面间的侧隙计算方法.基于多个平面内的共轭齿廓,利用放样算法生成空间齿廓,并进行干涉检查和侧隙结果验证.验证表明:空间齿廓能增大啮合区间和齿廓接触面积;采用两截面直引导线的放样方法生成的空间齿廓与多个截面内设计的共轭齿廓差别不大,可以满足一般精度的谐波齿廓传动的设计要求.
針對杯形柔輪在波髮生器作用下的錐度變形特徵造成垂直于迴轉軸的橫截麵內中麵變形麯線差異的問題,設計剛輪空間齒廓以提高諧波齒輪的齧閤性能.基于杯形柔輪的空間變性特徵,將剛輪空間齒廓設計轉化為垂直于軸線的多箇橫截麵內的平麵齒廓設計.設計瞭與變形後的柔輪齒廓實現空間齧閤的剛輪空間齒廓設計方法,及其齧閤齒麵間的側隙計算方法.基于多箇平麵內的共軛齒廓,利用放樣算法生成空間齒廓,併進行榦涉檢查和側隙結果驗證.驗證錶明:空間齒廓能增大齧閤區間和齒廓接觸麵積;採用兩截麵直引導線的放樣方法生成的空間齒廓與多箇截麵內設計的共軛齒廓差彆不大,可以滿足一般精度的諧波齒廓傳動的設計要求.
침대배형유륜재파발생기작용하적추도변형특정조성수직우회전축적횡절면내중면변형곡선차이적문제,설계강륜공간치곽이제고해파치륜적교합성능.기우배형유륜적공간변성특정,장강륜공간치곽설계전화위수직우축선적다개횡절면내적평면치곽설계.설계료여변형후적유륜치곽실현공간교합적강륜공간치곽설계방법,급기교합치면간적측극계산방법.기우다개평면내적공액치곽,이용방양산법생성공간치곽,병진행간섭검사화측극결과험증.험증표명:공간치곽능증대교합구간화치곽접촉면적;채용량절면직인도선적방양방법생성적공간치곽여다개절면내설계적공액치곽차별불대,가이만족일반정도적해파치곽전동적설계요구.