建井技术
建井技術
건정기술
2015年
1期
51-53
,共3页
煤矿%箕斗定重装载系统%液压称重%带式定重装载装置
煤礦%箕鬥定重裝載繫統%液壓稱重%帶式定重裝載裝置
매광%기두정중장재계통%액압칭중%대식정중장재장치
coal mine%quantitative loading system of skip%hydraulic weighting%belt type quantitative loading device
大海则煤矿主立井设计井深703.96m ，布置45t箕斗2对，箕斗高度22.2m ，正常提升时间74.4s ，休止时间45s ，1次循环时间119.4s。从工程投资、建设工期、技术可靠性和运行效率4个方面，对液压称重斗式定重装载装置和带式定重装载装置进行对比分析，对井筒箕斗定重装载系统设计进行优化，最终决定选用带式定重装载装置。
大海則煤礦主立井設計井深703.96m ，佈置45t箕鬥2對，箕鬥高度22.2m ，正常提升時間74.4s ，休止時間45s ，1次循環時間119.4s。從工程投資、建設工期、技術可靠性和運行效率4箇方麵，對液壓稱重鬥式定重裝載裝置和帶式定重裝載裝置進行對比分析，對井筒箕鬥定重裝載繫統設計進行優化，最終決定選用帶式定重裝載裝置。
대해칙매광주립정설계정심703.96m ，포치45t기두2대，기두고도22.2m ，정상제승시간74.4s ，휴지시간45s ，1차순배시간119.4s。종공정투자、건설공기、기술가고성화운행효솔4개방면，대액압칭중두식정중장재장치화대식정중장재장치진행대비분석，대정통기두정중장재계통설계진행우화，최종결정선용대식정중장재장치。
A designed depth of the mine main shaft in Dahaize Mine was 703.96m.Two pair of 45t skips would be set in the mine shaft.The skip height would be 22.2m ,a normal lifting time would be 74.4s , an inactivity time w ould be 45s and a cycle time w ould be 119.4s.From the aspects of the engineering investment ,construction period ,technical reliability and operation efficiency ,a comparison analysis was conducted between the hydraulic weighting type quantitative loading device and the belt type quantita‐tive loading device ,an optimization was conducted on the design of the skip quantitative loading system in the mine main shaft and the belt type quantitative loading device was finally selected.
