CAJ | 학술논문

皮带运输机在运行过程中，由于负载、皮带自身所受张力的不同，经常会发生打滑、跑偏、过载、撕裂等故障。本文旨在研究这些故障产生的原因，并通过智能控制器显示发生的故障，做到故障定位准确。本系统通过一些传感器对故障进行检测，将信号传入单片机，不同故障编码显示，通过数码管显示可以快速知道故障位置。系统以单片机为核心，通过外部信号和软件设计，大大提高系统稳定性。
피대운수궤재운행과정중，유우부재、피대자신소수장력적불동，경상회발생타활、포편、과재、시렬등고장。본문지재연구저사고장산생적원인，병통과지능공제기현시발생적고장，주도고장정위준학。본계통통과일사전감기대고장진행검측，장신호전입단편궤，불동고장편마현시，통과수마관현시가이쾌속지도고장위치。계통이단편궤위핵심，통과외부신호화연건설계，대대제고계통은정성。
Belt conveyor in the process of operation, due to the load, tension of the belt itself is different, often skid, wandering, overload, tearing failure. The purpose of this paper is to study the causes of these faults, and through the intelligent controller show that the fault, with accurate fault location. This system by some of the sensor fault detection, the signal into the microcontroller, different fault code display, through digital tube display can quickly know the fault position. System with the single chip processor as the core, through the external signal and the software design, greatly improve the system stability.