油气藏评价与开发
油氣藏評價與開髮
유기장평개여개발
2015年
2期
49-52
,共4页
双封%一趟管柱%分层压裂%低渗透
雙封%一趟管柱%分層壓裂%低滲透
쌍봉%일쟁관주%분층압렬%저삼투
double packer%one trip string%separate layer fracturing%low permeability
由于苏北阜宁组储层埋藏深、物性差、薄互油层多、低孔低渗,具有采收率低、裂缝延伸压力高、改造难度大、单井产能低等特点。采用常规分层压裂工艺,作业工序多、周期长,部分低渗储层改造不充分,造成措施效果不理想。为缓解层间矛盾,加强低孔低渗层压裂改造效果,采取Y341双封一趟管柱分层改造技术手段,借助裂缝设计软件模拟优化工艺参数进行储层改造。这项工艺技术的成功应用极大地缩短了作业周期,节省成本,提高了储层的改造程度。返排完机抽,改造初期与周围井相比平均多产油5.9 t/d,且产量较稳定。
由于囌北阜寧組儲層埋藏深、物性差、薄互油層多、低孔低滲,具有採收率低、裂縫延伸壓力高、改造難度大、單井產能低等特點。採用常規分層壓裂工藝,作業工序多、週期長,部分低滲儲層改造不充分,造成措施效果不理想。為緩解層間矛盾,加彊低孔低滲層壓裂改造效果,採取Y341雙封一趟管柱分層改造技術手段,藉助裂縫設計軟件模擬優化工藝參數進行儲層改造。這項工藝技術的成功應用極大地縮短瞭作業週期,節省成本,提高瞭儲層的改造程度。返排完機抽,改造初期與週圍井相比平均多產油5.9 t/d,且產量較穩定。
유우소북부저조저층매장심、물성차、박호유층다、저공저삼,구유채수솔저、렬봉연신압력고、개조난도대、단정산능저등특점。채용상규분층압렬공예,작업공서다、주기장,부분저삼저층개조불충분,조성조시효과불이상。위완해층간모순,가강저공저삼층압렬개조효과,채취Y341쌍봉일쟁관주분층개조기술수단,차조렬봉설계연건모의우화공예삼수진행저층개조。저항공예기술적성공응용겁대지축단료작업주기,절성성본,제고료저층적개조정도。반배완궤추,개조초기여주위정상비평균다산유5.9 t/d,차산량교은정。
With deep buried, bad property, multiple thin interbedded reservoir and low permeability reservoir, Funing group of North Jiangsu oil field has the characteristics of low recovery efficiency, high fracture extension pressure, difficult transformation, and low single-well productivity. Common separate layer fracturing process takes more work processes and long operating cycles, or causes inadequate of part of low permeability reservoir transformation, resulting that measures are not ideal. To ease the contra?diction between layers and strengthen the fracturing effects of the low porosity and permeability layer, the reservoir was reconstruct?ed by taking separate layer fracturing technology with Y341 double packer by one trip string and the crack design software to simu?late and optimize process parameters. The successful application of this technology greatly shortens the operating cycle, reduces cost savings, and improves the degree of reservoir transformation. After flowback and followed by the machine pumping, the oil pro?duction was 5.9 t/d more than average compared to the adjacent wells in the early transformation with stable yield.