压力容器
壓力容器
압력용기
2015年
4期
11-15
,共5页
2.25Cr-1Mo-0.25V钢%再热裂纹%取样位置%应变速率%保温时间
2.25Cr-1Mo-0.25V鋼%再熱裂紋%取樣位置%應變速率%保溫時間
2.25Cr-1Mo-0.25V강%재열렬문%취양위치%응변속솔%보온시간
2.25Cr-1Mo-0.25V steel%reheat cracking%sampling location%strain rate%soaking duration
2008年以来,为防止钒改进钢(2.25Cr-1Mo-0.25V)制加氢反应器出现再热裂纹,钒改进钢焊接材料均采用Gleeble再热裂纹试验确定焊缝金属的韧性储备。为研究Gleeble再热裂纹试验中的部分试验参数对试验结果的影响,对由钒改进钢制成的Gleeble试样进行一次焊接热循环模拟获取热影响区组织后,在不同参数值下进行Gleeble再热裂纹对比试验。试验结果表明,试样取样位置对试验结果影响较小,应变速率的变化对试验结果影响很大,保温时间在达到10 min之后对试验结果基本没有影响,为合理选择Gleeble再热裂纹试验参数提供了依据。
2008年以來,為防止釩改進鋼(2.25Cr-1Mo-0.25V)製加氫反應器齣現再熱裂紋,釩改進鋼銲接材料均採用Gleeble再熱裂紋試驗確定銲縫金屬的韌性儲備。為研究Gleeble再熱裂紋試驗中的部分試驗參數對試驗結果的影響,對由釩改進鋼製成的Gleeble試樣進行一次銲接熱循環模擬穫取熱影響區組織後,在不同參數值下進行Gleeble再熱裂紋對比試驗。試驗結果錶明,試樣取樣位置對試驗結果影響較小,應變速率的變化對試驗結果影響很大,保溫時間在達到10 min之後對試驗結果基本沒有影響,為閤理選擇Gleeble再熱裂紋試驗參數提供瞭依據。
2008년이래,위방지범개진강(2.25Cr-1Mo-0.25V)제가경반응기출현재열렬문,범개진강한접재료균채용Gleeble재열렬문시험학정한봉금속적인성저비。위연구Gleeble재열렬문시험중적부분시험삼수대시험결과적영향,대유범개진강제성적Gleeble시양진행일차한접열순배모의획취열영향구조직후,재불동삼수치하진행Gleeble재열렬문대비시험。시험결과표명,시양취양위치대시험결과영향교소,응변속솔적변화대시험결과영향흔대,보온시간재체도10 min지후대시험결과기본몰유영향,위합리선택Gleeble재열렬문시험삼수제공료의거。
To prevent the occurrence of reheat cracking in the vanadium modified steel (2.25Cr-1Mo-0.25V)heavy reactors fabrication,all vanadium modified steel welding materials have to be determined the toughness of weld metal by using gleeble reheat cracking(GRC)test from 2008.To study the influ-ence of some test parameters on the result,the vanadium modified steel specimens should be done the welding thermal cycle simulation test to get a simulated heat affected zone(HAZ)and then done GRC test in different parameter values.The experimental results implies the sampling location has litter effect and the strain rate has great effect on the test results,and the soaking duration has litter effect until the soa-king time reaches 10 min,which provide a basis for reasonable choice of parameters of GRC test.