金属矿山
金屬礦山
금속광산
METAL MINE
2015年
4期
111-113
,共3页
全尾砂胶结充填体%抗压强度%正交试验%方案优化
全尾砂膠結充填體%抗壓彊度%正交試驗%方案優化
전미사효결충전체%항압강도%정교시험%방안우화
Full tailings-cemented filling body%Compressive strength%Orthogonal experiment%Scheme optimization
为获得全尾砂胶结充填最优配比,降低矿山充填成本,保证空区稳定,以全尾砂胶结充填体试块为研究对象,试块的单轴抗压强度为指标,综合考虑充填体强度的影响因素,采用正交试验开展研究,并运用极差和方差分析法对充填体强度影响因素的敏感性和显著性进行分析。研究表明:试验最优配比方案为浓度75%,灰砂比1∶6,养护龄期28 d;影响试块的敏感性顺序是养护龄期>灰砂比>浓度;养护龄期对充填体强度的影响最显著。因此,矿山在生产实际中要保证充填体的养护时间。
為穫得全尾砂膠結充填最優配比,降低礦山充填成本,保證空區穩定,以全尾砂膠結充填體試塊為研究對象,試塊的單軸抗壓彊度為指標,綜閤攷慮充填體彊度的影響因素,採用正交試驗開展研究,併運用極差和方差分析法對充填體彊度影響因素的敏感性和顯著性進行分析。研究錶明:試驗最優配比方案為濃度75%,灰砂比1∶6,養護齡期28 d;影響試塊的敏感性順序是養護齡期>灰砂比>濃度;養護齡期對充填體彊度的影響最顯著。因此,礦山在生產實際中要保證充填體的養護時間。
위획득전미사효결충전최우배비,강저광산충전성본,보증공구은정,이전미사효결충전체시괴위연구대상,시괴적단축항압강도위지표,종합고필충전체강도적영향인소,채용정교시험개전연구,병운용겁차화방차분석법대충전체강도영향인소적민감성화현저성진행분석。연구표명:시험최우배비방안위농도75%,회사비1∶6,양호령기28 d;영향시괴적민감성순서시양호령기>회사비>농도;양호령기대충전체강도적영향최현저。인차,광산재생산실제중요보증충전체적양호시간。
In order to acquire the optimal matching scheme of the full tailings-cemented filling body,decrease the filling cost and guarantee the gap stability,and taking the full tailings-cemented filling body as the research object and the uniaxial compressive strength as the research index,the influencing factors for the strengthening of the filling body are comprehensively analyzed. The sensitivity and the significance of filling body′s influencing factors were analyzed by the range analysis and vari-ance analysis through applying orthogonal experiment. Researches showed that the optimal matching scheme of this experiment was the concentration of 75%,cement-sand ratio of 1 ∶ 6 and curing period for 28 days. The intensity sequence of the sensitivi-ty affecting the samples from highest to lowest was the curing age,cement-sand ratio and concentration. The curing age has the most significance on the filling bodies′compressive strength. Therefore,the mine needs to guarantee the curing age about the filling body in the practical production.