金属矿山
金屬礦山
금속광산
METAL MINE
2015年
4期
71-73
,共3页
小尺寸工作面%充分采动%下沉系数%计算参数
小呎吋工作麵%充分採動%下沉繫數%計算參數
소척촌공작면%충분채동%하침계수%계산삼수
Small face%Full mining%Factor of subsidence%Calculation parameters
生产实践中,受采煤技术、地质条件等因素的影响,所开采的工作面往往是煤层走向或倾向不能同时达到充分采动,因此面临的问题是如何将小工作面开采条件下的概率积分法计算参数换算为充分采动或接近充分采动条件下的计算参数,对于下沉系数的修正又是小工作面概率积分法计算参数的关键所在。通过对比某矿地质条件相似的不同工作面下的计算参数后,表明现有的下沉系数修正规律适用于某矿区。
生產實踐中,受採煤技術、地質條件等因素的影響,所開採的工作麵往往是煤層走嚮或傾嚮不能同時達到充分採動,因此麵臨的問題是如何將小工作麵開採條件下的概率積分法計算參數換算為充分採動或接近充分採動條件下的計算參數,對于下沉繫數的脩正又是小工作麵概率積分法計算參數的關鍵所在。通過對比某礦地質條件相似的不同工作麵下的計算參數後,錶明現有的下沉繫數脩正規律適用于某礦區。
생산실천중,수채매기술、지질조건등인소적영향,소개채적공작면왕왕시매층주향혹경향불능동시체도충분채동,인차면림적문제시여하장소공작면개채조건하적개솔적분법계산삼수환산위충분채동혹접근충분채동조건하적계산삼수,대우하침계수적수정우시소공작면개솔적분법계산삼수적관건소재。통과대비모광지질조건상사적불동공작면하적계산삼수후,표명현유적하침계수수정규률괄용우모광구。
In production practice,influenced by coal mining technology,geological conditions and other factors,the work-ing face cannot achieve full mining at the same time in coal seam strike or dip. So,the issue faced is how to convert some cal-culation parameters of probability integral method under the condition of small face mining into parameters under full or close to full mining conditions. Also,correction in factor of subsidence is the key to calculate the parameters by small-face probability integration method. After contrast on calculating parameters of different working faces under similar geological conditions,it is indicated that the correction rules of existing subsidence coefficient is applicable to this mining area.