CAJ | 학술논문

目的：观察紫外线灯管不同测试部位对紫外线灯辐照强度计数的影响。方法采用随机分组的方法，测试不同部位紫外线照射强度。结果在相同电压、相同温湿度下，使用同一灯架及镇流器，因紫外线辐照强度仪探头放置位置不同，所得照射强度数值不一样。结论在行灯管照射强度检测的时候，应将紫外线辐照强度仪探头放置在灯管的中心位置。
목적：관찰자외선등관불동측시부위대자외선등복조강도계수적영향。방법채용수궤분조적방법，측시불동부위자외선조사강도。결과재상동전압、상동온습도하，사용동일등가급진류기，인자외선복조강도의탐두방치위치불동，소득조사강도수치불일양。결론재행등관조사강도검측적시후，응장자외선복조강도의탐두방치재등관적중심위치。
Objective To observe the effect of different test sites on the ultraviolet lamp ultraviolet radiation intensity counts.Methods Using the method of randomized, testing different parts ofultraviolet irradiation intensity. Results Under the same voltage, temperature and humidity underthe same, using the same lamp holder and a ballast for ultraviolet radiation intensity probeposition is different, not the same numerical income exposure intensity. Conclusion When the detection you lamp irradiation intensity, ultraviolet radiation intensity probe should be placed in the center of the lamp tube.