功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2015年
10期
10110-10113
,共4页
TiO2%N掺杂%光催化%纳米管%尿素
TiO2%N摻雜%光催化%納米管%尿素
TiO2%N참잡%광최화%납미관%뇨소
TiO2%N-dopping%photocatalysis%nanotubes%urea
亚硝酸钠在酸性条件下可以与尿素发生反应生成氮气,在阳极氧化制备TiO2纳米管的电解液中加入放出氮气反应需要的试剂,控制酸度连续放氮,实现了一步法N掺杂的 TiO2纳米管的新制备方法。并且通过 SEM、EDS、XRD、XPS 等表征手段对 N 掺杂和未掺杂的TiO2纳米管的表面形貌和晶型结构及元素组成进行了对比分析,最后通过甲基橙的光催化降解来表征了N-TiO2制备过程中盐酸浓度和亚硝酸钠浓度对光催化活性的影响。
亞硝痠鈉在痠性條件下可以與尿素髮生反應生成氮氣,在暘極氧化製備TiO2納米管的電解液中加入放齣氮氣反應需要的試劑,控製痠度連續放氮,實現瞭一步法N摻雜的 TiO2納米管的新製備方法。併且通過 SEM、EDS、XRD、XPS 等錶徵手段對 N 摻雜和未摻雜的TiO2納米管的錶麵形貌和晶型結構及元素組成進行瞭對比分析,最後通過甲基橙的光催化降解來錶徵瞭N-TiO2製備過程中鹽痠濃度和亞硝痠鈉濃度對光催化活性的影響。
아초산납재산성조건하가이여뇨소발생반응생성담기,재양겁양화제비TiO2납미관적전해액중가입방출담기반응수요적시제,공제산도련속방담,실현료일보법N참잡적 TiO2납미관적신제비방법。병차통과 SEM、EDS、XRD、XPS 등표정수단대 N 참잡화미참잡적TiO2납미관적표면형모화정형결구급원소조성진행료대비분석,최후통과갑기등적광최화강해래표정료N-TiO2제비과정중염산농도화아초산납농도대광최화활성적영향。
N doping TiO2 was prepared by one step method of anodic oxidation combined with reaction of urea with sodium nitrite under acidic conditions to release nitrogen,anatase N-TiO2 were obtained upon calcination at temperature of 45 ℃ over four hours.The surface morphology,structure and elements composition was charac-terized by scanning electron microscope(SEM),energy dispersive spectrometry(EDS),X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS).Photocatalytic activity was characterized by degradation of methyl orange.The result showed that the diameters of the as-prepeared TiO2 and N-TiO2 were about 120 and 80 nm. XRD crystal structure analysis showed there were no changes of anatase phase in the process of N-doped TiO2 , but 101 crystal plane peak was significantly enhanced.XPS detected the N atom percentage content of 5.60%. The photocatalytic degradation of methyl orange indicated N-doped TiO2 has higher photocatalytic activity than undoped.