润滑与密封
潤滑與密封
윤활여밀봉
LUBRICATION ENGINEERING
2015年
4期
69-73
,共5页
郭婉晴%郭小川%宋辉%王晶
郭婉晴%郭小川%宋輝%王晶
곽완청%곽소천%송휘%왕정
钛皂%钛酸四异丙酯%硬脂酸%润滑脂
鈦皂%鈦痠四異丙酯%硬脂痠%潤滑脂
태조%태산사이병지%경지산%윤활지
titanium soap%titanium isopropoxide%stearic acid%grease
以钛酸四异丙酯、硬脂酸和极性溶剂为原料制备钛基润滑脂,考察基础油和有机酸种类、配比和工艺对钛基脂性能的影响。结果表明:不同种类的有机酸对成脂影响很大,钛皂对不同基础油的稠化能力也不同;以硬脂酸为有机酸、石蜡基油为基础油,最高炼制温度为180~200℃,冷却方式为慢冷时,制得的钛基脂的综合性能较好,其滴点约280℃,远高于一般单皂基润滑脂。红外光谱分析结果表明,该制备工艺形成了钛皂,同时避免了残酸问题。
以鈦痠四異丙酯、硬脂痠和極性溶劑為原料製備鈦基潤滑脂,攷察基礎油和有機痠種類、配比和工藝對鈦基脂性能的影響。結果錶明:不同種類的有機痠對成脂影響很大,鈦皂對不同基礎油的稠化能力也不同;以硬脂痠為有機痠、石蠟基油為基礎油,最高煉製溫度為180~200℃,冷卻方式為慢冷時,製得的鈦基脂的綜閤性能較好,其滴點約280℃,遠高于一般單皂基潤滑脂。紅外光譜分析結果錶明,該製備工藝形成瞭鈦皂,同時避免瞭殘痠問題。
이태산사이병지、경지산화겁성용제위원료제비태기윤활지,고찰기출유화유궤산충류、배비화공예대태기지성능적영향。결과표명:불동충류적유궤산대성지영향흔대,태조대불동기출유적주화능력야불동;이경지산위유궤산、석사기유위기출유,최고련제온도위180~200℃,냉각방식위만랭시,제득적태기지적종합성능교호,기적점약280℃,원고우일반단조기윤활지。홍외광보분석결과표명,해제비공예형성료태조,동시피면료잔산문제。