润滑与密封
潤滑與密封
윤활여밀봉
LUBRICATION ENGINEERING
2015年
4期
61-64
,共4页
姚翠翠%王玉玲%惠英龙
姚翠翠%王玉玲%惠英龍
요취취%왕옥령%혜영룡
尾轴密封%端面比压%接触面%变形
尾軸密封%耑麵比壓%接觸麵%變形
미축밀봉%단면비압%접촉면%변형
seal of stem shaft%face specific pressure%contact surface%deformation
为了将端面比压值准确地应用到机械密封的安装或维修过程中,研究机械密封端面比压与变形量的关系。利用ANSYS建立某机械密封橡胶静环的有限元模型,对静环接触面施加不同的面力,分析其接触面不同节点处的变形情况和沿半径方向的变形情况。结果表明, Mooney?Rivlin模型中材料常数C2和C1的比值对橡胶静环位移变形量的影响很小。橡胶静环接触面变形量的增量随径向半径的增大而减少。利用最小二乘法拟合出端面比压和静环变形量的关系表达式,通过该表达式可将机械密封设计阶段的端面比压值转化为直观的位移,利用位移来确定动环的位置,为后续的安装、维护提供理论依据。
為瞭將耑麵比壓值準確地應用到機械密封的安裝或維脩過程中,研究機械密封耑麵比壓與變形量的關繫。利用ANSYS建立某機械密封橡膠靜環的有限元模型,對靜環接觸麵施加不同的麵力,分析其接觸麵不同節點處的變形情況和沿半徑方嚮的變形情況。結果錶明, Mooney?Rivlin模型中材料常數C2和C1的比值對橡膠靜環位移變形量的影響很小。橡膠靜環接觸麵變形量的增量隨徑嚮半徑的增大而減少。利用最小二乘法擬閤齣耑麵比壓和靜環變形量的關繫錶達式,通過該錶達式可將機械密封設計階段的耑麵比壓值轉化為直觀的位移,利用位移來確定動環的位置,為後續的安裝、維護提供理論依據。
위료장단면비압치준학지응용도궤계밀봉적안장혹유수과정중,연구궤계밀봉단면비압여변형량적관계。이용ANSYS건립모궤계밀봉상효정배적유한원모형,대정배접촉면시가불동적면력,분석기접촉면불동절점처적변형정황화연반경방향적변형정황。결과표명, Mooney?Rivlin모형중재료상수C2화C1적비치대상효정배위이변형량적영향흔소。상효정배접촉면변형량적증량수경향반경적증대이감소。이용최소이승법의합출단면비압화정배변형량적관계표체식,통과해표체식가장궤계밀봉설계계단적단면비압치전화위직관적위이,이용위이래학정동배적위치,위후속적안장、유호제공이론의거。