装备环境工程
裝備環境工程
장비배경공정
EQUIPMENT ENVIRONMENTAL ENGINEERING
2015年
2期
44-48
,共5页
电动振动台%正弦扫频%传递函数%最小二乘%频域辨识
電動振動檯%正絃掃頻%傳遞函數%最小二乘%頻域辨識
전동진동태%정현소빈%전체함수%최소이승%빈역변식
electrodynamic shaker%sine-sweep%transfer function%least squares%frequency identification
目的:研究以电动振动台为典型设备的相关振动试验装置的频域辨识技术。方法通过分析电动振动台数学模型,采用正弦扫频试验方法,进行全频带振动台空台面正弦扫频,并对所获得的时域正弦扫频数据进行频谱分析,进而获得系统的频率数据,再运用复数域上的最小二乘拟合算法,完成振动台模型传递函数的辨识。结果通过某型电动台空台面试验,对一组实测数据进行辨识,辨识出的电动振动台模拟与真实模拟一致。结论通过该方法并合理选取模型结构,能够很好地辨识出振动试验装置的模型。
目的:研究以電動振動檯為典型設備的相關振動試驗裝置的頻域辨識技術。方法通過分析電動振動檯數學模型,採用正絃掃頻試驗方法,進行全頻帶振動檯空檯麵正絃掃頻,併對所穫得的時域正絃掃頻數據進行頻譜分析,進而穫得繫統的頻率數據,再運用複數域上的最小二乘擬閤算法,完成振動檯模型傳遞函數的辨識。結果通過某型電動檯空檯麵試驗,對一組實測數據進行辨識,辨識齣的電動振動檯模擬與真實模擬一緻。結論通過該方法併閤理選取模型結構,能夠很好地辨識齣振動試驗裝置的模型。
목적:연구이전동진동태위전형설비적상관진동시험장치적빈역변식기술。방법통과분석전동진동태수학모형,채용정현소빈시험방법,진행전빈대진동태공태면정현소빈,병대소획득적시역정현소빈수거진행빈보분석,진이획득계통적빈솔수거,재운용복수역상적최소이승의합산법,완성진동태모형전체함수적변식。결과통과모형전동태공태면시험,대일조실측수거진행변식,변식출적전동진동태모의여진실모의일치。결론통과해방법병합리선취모형결구,능구흔호지변식출진동시험장치적모형。
Objective To study the frequency domain identification technology for vibration test equipment, using the electric dynamic shaker as a typical device. Methods Firstly, the mathematics model of the electrodynamic shaker was analyzed, secondly, the sine-sweep test was used for whole-frequency sine sweep of the empty vibration table, and the sine-sweep signal data acquired was subjected to frequency spectrum analysis. So the frequency data of the electrodynamic shaker system was acquired. Finally, the least squares complex-curve fitting algorithm was used to accomplish the identification of the transfer function for the vibration table model. Results Through test with an empty electrodynamic shaker, a group of measured data was identified, and the electrodynamic shaker simulation mode identified was consistent with the real simulation. Conclusion Using this method, in combination with matching the structure of the shaker model, the model of the vibration test equipment could be well identified.