安徽电气工程职业技术学院学报
安徽電氣工程職業技術學院學報
안휘전기공정직업기술학원학보
JOURNAL OF ANHUI ELECTRICAL ENGINEERING PROFESSIONAL TECHNIQUE COLLEGE
2015年
1期
87-90
,共4页
机组改造%节能%抽凝%背压
機組改造%節能%抽凝%揹壓
궤조개조%절능%추응%배압
retrofit%energy saving%extraction condensing%back pressure
某热电厂为提高能源利用率,拟新建一台6 MW中温次高压背压式汽轮发电机组,替代2台3 MW中温中压背压式汽轮发电机组,同时为解决公司淡季热负荷低造成系统稳定性差的问题,将一期1台3 MW抽凝机组改造成后置机接在背压机排汽管道后,利用背压机排汽作为它的进汽,起到维持背压机稳定运行的作用。本文对此技术改造进行了分析,以高参数的背压机组替代低参数的背压机组,提高能源利用率,减少污染物排放总量,达到节约能源、保护环境、提高区域内居民生活质量的目的。
某熱電廠為提高能源利用率,擬新建一檯6 MW中溫次高壓揹壓式汽輪髮電機組,替代2檯3 MW中溫中壓揹壓式汽輪髮電機組,同時為解決公司淡季熱負荷低造成繫統穩定性差的問題,將一期1檯3 MW抽凝機組改造成後置機接在揹壓機排汽管道後,利用揹壓機排汽作為它的進汽,起到維持揹壓機穩定運行的作用。本文對此技術改造進行瞭分析,以高參數的揹壓機組替代低參數的揹壓機組,提高能源利用率,減少汙染物排放總量,達到節約能源、保護環境、提高區域內居民生活質量的目的。
모열전엄위제고능원이용솔,의신건일태6 MW중온차고압배압식기륜발전궤조,체대2태3 MW중온중압배압식기륜발전궤조,동시위해결공사담계열부하저조성계통은정성차적문제,장일기1태3 MW추응궤조개조성후치궤접재배압궤배기관도후,이용배압궤배기작위타적진기,기도유지배압궤은정운행적작용。본문대차기술개조진행료분석,이고삼수적배압궤조체대저삼수적배압궤조,제고능원이용솔,감소오염물배방총량,체도절약능원、보호배경、제고구역내거민생활질량적목적。
To improve the utilization rate of energy, a thermal power plant planned to build a 6MW medi-um temperature sub-high pressure back pressure turbine generator unit, which would replace two 3MW medium temperature and medium pressure back pressure turbine generator units. At the same time, a 3 MW extraction condensing unit in the first phase of the project was converted into a back pressure tur-bine with post machine connected with the exhaust steam pipe in order to solve the problem of poor system stability caused by the low heat load in the off-season in the company. It used the exhaust steam of the back pressure turbine as its steam admission to maintain the stable operation of the back pressure machine. This paper analyzed the technical transformation. Using the back pressure turbine with high parameters instead of the one with low parameters can improve energy efficiency; reduce pollutant emis-sions to achieve the aim of saving energy, protecting the environment and enhancing the area resident’ s quality of life.