CAJ | 학술논문

介绍环保型促进剂XT480在轮胎内层帘布胶中的应用。结果表明：在轮胎内层帘布胶中用促进剂XT480等量替代促进剂CBS，胶料的焦烧时间延长，硫化时间缩短，工艺性能改善，生产成本降低；硫化胶的H抽出力提高，其它物理性能相当；成品轮胎出现内层帘布胶脱层问题减少。在轮胎内层帘布胶中用促进剂XT480等量替代促进剂CBS完全可行。
개소배보형촉진제XT480재륜태내층렴포효중적응용。결과표명：재륜태내층렴포효중용촉진제XT480등량체대촉진제CBS，효료적초소시간연장，류화시간축단，공예성능개선，생산성본강저；류화효적H추출력제고，기타물이성능상당；성품륜태출현내층렴포효탈층문제감소。재륜태내층렴포효중용촉진제XT480등량체대촉진제CBS완전가행。
This paper introduces the application of environmentally friendly accelerator XT480 in tire inner ply. In the experiment, XT480 was applied in the compound to replace accelerator CBS at same addition level. The test results showed that the scorch time of the compound was extended, the curing time was shortened, the processing properties were improved, the pull-out strength increased, the other physical properties were kept unchanged, production cost was reduced, and the delamination issue of the inner ply in ifnished tire was reduced. Accelerator XT480 could replace equivelent amount accelerator CBS in tire inner ply compound.