CAJ | 학술논문

提出一种避免因换流阀触发字奇偶校验标准过于严苛，而造成控制保护系统误动作的检验策略改进措施。其核心思想是通过触发相位检测以及引入的触发顺序检测来实现奇偶检验的保护，在此基础上可降低保护动作级别。基于这种检验策略改进措施的阀基电子系统已经在工程中应用。这种改进措施有效消除了现有保护设置产生的运行风险，避免了系统误动作的概率。
제출일충피면인환류벌촉발자기우교험표준과우엄가，이조성공제보호계통오동작적검험책략개진조시。기핵심사상시통과촉발상위검측이급인입적촉발순서검측래실현기우검험적보호，재차기출상가강저보호동작급별。기우저충검험책략개진조시적벌기전자계통이경재공정중응용。저충개진조시유효소제료현유보호설치산생적운행풍험，피면료계통오동작적개솔。
An improvement measure to the validation of the firing word parity check to avoid false action from control and protection system caused by harsh validation standards is proposed. Essentially, this improved strategy realizes the protection effect of parity check through firing phase check and additional firing sequence check, based on which the protective level can be decreased. Valve base electronics based on the improvement measure of this validation strategy has been deployed in engineering. This improvement measure has effectively eliminated operation risk under current protection configuration and lowered false action probability of the scheme.