机械工程师
機械工程師
궤계공정사
MECHANICAL ENGINEER
2015年
4期
127-129
,共3页
毛潭%李继栋%史喆琼%李玏一
毛潭%李繼棟%史喆瓊%李玏一
모담%리계동%사철경%리륵일
平板闸门%淹没出流%流量系数
平闆閘門%淹沒齣流%流量繫數
평판갑문%엄몰출류%류량계수
flat sluice%sluice Submerged%flow coefficient
搭建了一个水力学的实验模型,并对平板闸孔淹没出流的流量进行了实验,利用理论分析方法分析了平板闸门在淹没出流的流态下的流量计算公式,得出了淹没出流流量值主要与流量系数有关。为了对其流量系数进行研究分析,以常用的3种淹没出流流量系数的计算公式计算出流量,将计算得出的3种理论流量值分别与实验测得的流量值进行对比,得出了最优的计算方法,为工程应用中淹没流量系数计算公式的选择提供了实验依据。
搭建瞭一箇水力學的實驗模型,併對平闆閘孔淹沒齣流的流量進行瞭實驗,利用理論分析方法分析瞭平闆閘門在淹沒齣流的流態下的流量計算公式,得齣瞭淹沒齣流流量值主要與流量繫數有關。為瞭對其流量繫數進行研究分析,以常用的3種淹沒齣流流量繫數的計算公式計算齣流量,將計算得齣的3種理論流量值分彆與實驗測得的流量值進行對比,得齣瞭最優的計算方法,為工程應用中淹沒流量繫數計算公式的選擇提供瞭實驗依據。
탑건료일개수역학적실험모형,병대평판갑공엄몰출류적류량진행료실험,이용이론분석방법분석료평판갑문재엄몰출류적류태하적류량계산공식,득출료엄몰출류류량치주요여류량계수유관。위료대기류량계수진행연구분석,이상용적3충엄몰출류류량계수적계산공식계산출류량,장계산득출적3충이론류량치분별여실험측득적류량치진행대비,득출료최우적계산방법,위공정응용중엄몰류량계수계산공식적선택제공료실험의거。
This paper sets up an experimental model of hydraulics ,and tests the flow of the flat sluice submerged discharge. Theoretical analysis method is used to analyze the flow calculation formula of the bulkhead gate when the flat sluice of bulkhead gate is under the flow of submerged discharge. It is concluded that the submerged discharge flow value is mainly related to the flow coefficient. To study the flow coefficient of submerged discharge ,the flow is calculated using three different kinds of submerged discharge flow coefficient calculation formula. The three calculated theoretical flow value are compared with the experiment measured flow value to obtain the optimum calculation method ,which provides an experimental evidence for selecting the calculation formula of submerged discharge flow coefficient for the engineering application.