海军航空工程学院学报
海軍航空工程學院學報
해군항공공정학원학보
JOURNAL OF NAVAL AERONAUTICAL ENGINEERING INSTITUTE
2015年
2期
143-146
,共4页
设备构件%射流毁伤%破甲弹
設備構件%射流燬傷%破甲彈
설비구건%사류훼상%파갑탄
device instrument%jet damage%armour-piercing projectile
通过对设备构件的结构布局和射流毁伤特性的详细分析,得到2种设备构件的模拟结构,并开展了对射流开孔性能影响的试验。试验结果表明,采用均匀平板模拟的方式能够较准确地模拟设备构件对射流的影响。研究结果对破甲弹的设计具有较好的参考意义。
通過對設備構件的結構佈跼和射流燬傷特性的詳細分析,得到2種設備構件的模擬結構,併開展瞭對射流開孔性能影響的試驗。試驗結果錶明,採用均勻平闆模擬的方式能夠較準確地模擬設備構件對射流的影響。研究結果對破甲彈的設計具有較好的參攷意義。
통과대설비구건적결구포국화사류훼상특성적상세분석,득도2충설비구건적모의결구,병개전료대사류개공성능영향적시험。시험결과표명,채용균균평판모의적방식능구교준학지모의설비구건대사류적영향。연구결과대파갑탄적설계구유교호적삼고의의。
Through detailed analysis on the configuration of device instrument of two and the characteristices of jet damage, types of device instrument and conducts the test of the influence of equipment structural parts was obtained and the test of the influence on the jet damage performance was done. Test results showed that uniform plate simulating method could ac?curately simulate the influence of device instrument on the jet, and the research results had great reference significance for the design of high explosive armour-piercing projectile.