纤维素科学与技术
纖維素科學與技術
섬유소과학여기술
JOURNAL OF CELLULOSE SCIENCE AND TECHNOLOGY
2015年
1期
8-13,35
,共7页
陈帅%王玮%马收%刘晓亚
陳帥%王瑋%馬收%劉曉亞
진수%왕위%마수%류효아
纤维素%纳米氮化硅%复合膜%性能
纖維素%納米氮化硅%複閤膜%性能
섬유소%납미담화규%복합막%성능
以LiOH/urea/H2O为溶剂体系,采用溶胶-凝胶法制备纤维素多孔膜的过程中,引入经表面改性的纳米氮化硅(Si3N4),制得了纤维素/纳米Si3N4复合膜.采用红外光谱分析(FT-IR)、扫描电子显微镜(SEM)、应力-应变分析、热导率测定和紫外光反射测试对纳米氮化硅表面改性的效果以及复合膜的结构和性能进行了表征.结果表明,纳米氮化硅表面成功地接枝上部分醇解的聚乙酸乙烯酯,使其在水中的分散性大幅提高;当纳米氮化硅含量适中时,在复合膜的拉伸强度和杨氏模量增加的同时,其导热率提高,并具有较高的抗紫外线性能,赋予了纤维素多孔膜新的功能性.
以LiOH/urea/H2O為溶劑體繫,採用溶膠-凝膠法製備纖維素多孔膜的過程中,引入經錶麵改性的納米氮化硅(Si3N4),製得瞭纖維素/納米Si3N4複閤膜.採用紅外光譜分析(FT-IR)、掃描電子顯微鏡(SEM)、應力-應變分析、熱導率測定和紫外光反射測試對納米氮化硅錶麵改性的效果以及複閤膜的結構和性能進行瞭錶徵.結果錶明,納米氮化硅錶麵成功地接枝上部分醇解的聚乙痠乙烯酯,使其在水中的分散性大幅提高;噹納米氮化硅含量適中時,在複閤膜的拉伸彊度和楊氏模量增加的同時,其導熱率提高,併具有較高的抗紫外線性能,賦予瞭纖維素多孔膜新的功能性.
이LiOH/urea/H2O위용제체계,채용용효-응효법제비섬유소다공막적과정중,인입경표면개성적납미담화규(Si3N4),제득료섬유소/납미Si3N4복합막.채용홍외광보분석(FT-IR)、소묘전자현미경(SEM)、응력-응변분석、열도솔측정화자외광반사측시대납미담화규표면개성적효과이급복합막적결구화성능진행료표정.결과표명,납미담화규표면성공지접지상부분순해적취을산을희지,사기재수중적분산성대폭제고;당납미담화규함량괄중시,재복합막적랍신강도화양씨모량증가적동시,기도열솔제고,병구유교고적항자외선성능,부여료섬유소다공막신적공능성.