炼油技术与工程
煉油技術與工程
련유기술여공정
PETROLEUM REFINERY ENGINEERING
2015年
3期
60-64
,共5页
颜峰%谢崇亮%王松涛%范海玲%孙方宪
顏峰%謝崇亮%王鬆濤%範海玲%孫方憲
안봉%사숭량%왕송도%범해령%손방헌
延迟焦化装置%放空冷却系统%污油回炼%破乳剂%不凝气回收
延遲焦化裝置%放空冷卻繫統%汙油迴煉%破乳劑%不凝氣迴收
연지초화장치%방공냉각계통%오유회련%파유제%불응기회수
delayed coking%contacting cooling system%slurry oil recycle%demulsifier%non-condensable gas recovery
某1 Mt/a延迟焦化装置放空冷却系统采用闭式塔内冷却技术,运行过程中出现外甩污油量大、不凝气外排造成全厂火炬系统负荷较大、放空塔顶含硫污水含油率过高造成酸性水汽提装置换热器结垢等问题,同时对延迟焦化装置提出回炼全厂污油的要求.为解决以上问题,装置停工检修过程中对放空冷却系统进行改造,主要内容为:增加放空塔底加热器;增加污油至焦炭塔顶大油气管线做急冷油管线;增加破乳剂注入及不凝气回收系统.改造后可实现该装置自产污油及全厂污油做焦炭塔顶急冷油、放空塔顶酸性水满足酸性水汽提装置进料要求及年回收约2 000 t不凝气等,实现了环保及经济效益的综合效果.
某1 Mt/a延遲焦化裝置放空冷卻繫統採用閉式塔內冷卻技術,運行過程中齣現外甩汙油量大、不凝氣外排造成全廠火炬繫統負荷較大、放空塔頂含硫汙水含油率過高造成痠性水汽提裝置換熱器結垢等問題,同時對延遲焦化裝置提齣迴煉全廠汙油的要求.為解決以上問題,裝置停工檢脩過程中對放空冷卻繫統進行改造,主要內容為:增加放空塔底加熱器;增加汙油至焦炭塔頂大油氣管線做急冷油管線;增加破乳劑註入及不凝氣迴收繫統.改造後可實現該裝置自產汙油及全廠汙油做焦炭塔頂急冷油、放空塔頂痠性水滿足痠性水汽提裝置進料要求及年迴收約2 000 t不凝氣等,實現瞭環保及經濟效益的綜閤效果.
모1 Mt/a연지초화장치방공냉각계통채용폐식탑내냉각기술,운행과정중출현외솔오유량대、불응기외배조성전엄화거계통부하교대、방공탑정함류오수함유솔과고조성산성수기제장치환열기결구등문제,동시대연지초화장치제출회련전엄오유적요구.위해결이상문제,장치정공검수과정중대방공냉각계통진행개조,주요내용위:증가방공탑저가열기;증가오유지초탄탑정대유기관선주급랭유관선;증가파유제주입급불응기회수계통.개조후가실현해장치자산오유급전엄오유주초탄탑정급랭유、방공탑정산성수만족산성수기제장치진료요구급년회수약2 000 t불응기등,실현료배보급경제효익적종합효과.