中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2015年
7期
943-948
,共6页
胡建军%孔祥东%侯冠男%俞滨%权凌霄
鬍建軍%孔祥東%侯冠男%俞濱%權凌霄
호건군%공상동%후관남%유빈%권릉소
直角转弯流道%PIV%刀尖角容腔%液流特性
直角轉彎流道%PIV%刀尖角容腔%液流特性
직각전만류도%PIV%도첨각용강%액류특성
right-angle turn channel%PIV%tool included cavity%flow characteristics
针对液压集成块典型的直角转弯流道结构,搭建了一个低速流场可视化测量试验台,采用2D-PIV流场测试技术实现了6种带有不同刀尖角容腔的直角转弯流道流场的测量。测量结果表明:在刀尖角容腔和直角转弯出流管段内拐角处分别出现涡流,前者涡流尺度随容腔长度的增加而增大,后者涡流尺度则与容腔长度无关。分析了刀尖角容腔长度及与进出口相对位置的关系对直角转弯流道液流特性的影响,发现出流方向正对刀尖角容腔时的流动损失更小。研究结果为集成块内部转弯流道结构优化提供了设计参考。
針對液壓集成塊典型的直角轉彎流道結構,搭建瞭一箇低速流場可視化測量試驗檯,採用2D-PIV流場測試技術實現瞭6種帶有不同刀尖角容腔的直角轉彎流道流場的測量。測量結果錶明:在刀尖角容腔和直角轉彎齣流管段內枴角處分彆齣現渦流,前者渦流呎度隨容腔長度的增加而增大,後者渦流呎度則與容腔長度無關。分析瞭刀尖角容腔長度及與進齣口相對位置的關繫對直角轉彎流道液流特性的影響,髮現齣流方嚮正對刀尖角容腔時的流動損失更小。研究結果為集成塊內部轉彎流道結構優化提供瞭設計參攷。
침대액압집성괴전형적직각전만류도결구,탑건료일개저속류장가시화측량시험태,채용2D-PIV류장측시기술실현료6충대유불동도첨각용강적직각전만류도류장적측량。측량결과표명:재도첨각용강화직각전만출류관단내괴각처분별출현와류,전자와류척도수용강장도적증가이증대,후자와류척도칙여용강장도무관。분석료도첨각용강장도급여진출구상대위치적관계대직각전만류도액류특성적영향,발현출류방향정대도첨각용강시적류동손실경소。연구결과위집성괴내부전만류도결구우화제공료설계삼고。
This paper aimed to investigate the flow field characteristics of right-angle turn channel with different tool included cavities in the typical hydraulic manifold block.A low-speed visualization test rig was developed and the flow field of right-angle turn channel with six kinds tool included cavi-ties was measured using 2D-PIV technique.It is found that two vortices appear in the tool included cavity and the inner corner of outlet section respectively.The vortex in the tool included cavity increa-ses with increasing of the cavity length,the vortex in the inner corner of outlet section has nothing to do with the length of cavity.Then,the effects of length and position of the tool included cavity on flow characteristics of right-angle turn channel were analyzed and found that the arrangement of the tool included cavity opposite to the outlet direction is more advantageous.This study provides design reference for the structure improvement of flow passage in the hydraulic manifold block.