电工技术学报
電工技術學報
전공기술학보
TRANSACTIONS OF CHINA ELECTROTECHNICAL SOCIETY
2015年
5期
111-118
,共8页
董华军%杨海军%郭英杰%向川%康凯%郭方准
董華軍%楊海軍%郭英傑%嚮川%康凱%郭方準
동화군%양해군%곽영걸%향천%강개%곽방준
真空灭弧室%触头结构%三维磁场%仿真
真空滅弧室%觸頭結構%三維磁場%倣真
진공멸호실%촉두결구%삼유자장%방진
Vacuum interrupters%contact structure%3-D magnetic field%simulation
对一种由螺旋槽横磁触头和杯状纵磁触头并联组成的新型真空灭弧室触头结构进行了磁场仿真,该触头内部的横磁触头和环形触头片材料为CuCr50,外部的纵磁触头的杯座材料为不锈钢.建立了三维触头结构模型,采用有限元分析方法对电流处于峰值时和电流过零时动、静触头表面和触头间隙中心处的静态磁场和瞬态磁场进行仿真,瞬态磁场计算过程中考虑到了涡流的影响.结果表明,该结构触头产生的纵向磁场在动、静触头表面及触头间隙中心处分布较均匀且磁通密度满足要求,有效磁通密度区域占触头表面积较大,电流过零后剩余磁场少,磁场滞后时间小,且导体电阻小.
對一種由螺鏇槽橫磁觸頭和杯狀縱磁觸頭併聯組成的新型真空滅弧室觸頭結構進行瞭磁場倣真,該觸頭內部的橫磁觸頭和環形觸頭片材料為CuCr50,外部的縱磁觸頭的杯座材料為不鏽鋼.建立瞭三維觸頭結構模型,採用有限元分析方法對電流處于峰值時和電流過零時動、靜觸頭錶麵和觸頭間隙中心處的靜態磁場和瞬態磁場進行倣真,瞬態磁場計算過程中攷慮到瞭渦流的影響.結果錶明,該結構觸頭產生的縱嚮磁場在動、靜觸頭錶麵及觸頭間隙中心處分佈較均勻且磁通密度滿足要求,有效磁通密度區域佔觸頭錶麵積較大,電流過零後剩餘磁場少,磁場滯後時間小,且導體電阻小.
대일충유라선조횡자촉두화배상종자촉두병련조성적신형진공멸호실촉두결구진행료자장방진,해촉두내부적횡자촉두화배형촉두편재료위CuCr50,외부적종자촉두적배좌재료위불수강.건립료삼유촉두결구모형,채용유한원분석방법대전류처우봉치시화전류과령시동、정촉두표면화촉두간극중심처적정태자장화순태자장진행방진,순태자장계산과정중고필도료와류적영향.결과표명,해결구촉두산생적종향자장재동、정촉두표면급촉두간극중심처분포교균균차자통밀도만족요구,유효자통밀도구역점촉두표면적교대,전류과령후잉여자장소,자장체후시간소,차도체전조소.