CAJ | 학술논문

基于快速成形中的三维CAD实体模型，在分析传统层片厚度计算方法原理的基础上，提出了一种CAD模型的轮廓曲线直接分层新算法。该算法通过3个平行于Z轴的平面去和CAD模型求交，进而得到3条沿着Z轴的轮廓曲线，然后采用对3条轮廓曲线加权的方法，垂直于Z轴剖切三维CAD模型，得到满足误差要求的一系列层片，以实现快速成形的分层制造。最后通过实例对该自适应分层算法进行了验证，证明了该算法的可行性和正确性。
기우쾌속성형중적삼유CAD실체모형，재분석전통층편후도계산방법원리적기출상，제출료일충CAD모형적륜곽곡선직접분층신산법。해산법통과3개평행우Z축적평면거화CAD모형구교，진이득도3조연착Z축적륜곽곡선，연후채용대3조륜곽곡선가권적방법，수직우Z축부절삼유CAD모형，득도만족오차요구적일계렬층편，이실현쾌속성형적분층제조。최후통과실례대해자괄응분층산법진행료험증，증명료해산법적가행성화정학성。
This paper presents a new algorithm for direct slicing of CAD model contour curve , which based on the analysis of calculation of layer thickness on the traditional method about rapid prototyping. In the algorithm,through three parallel to the Z-axis plane,the CAD model has been intersected,and then get three along the Z-axis contour curve. Also,using the method of the three contour curves weighted,cutting the 3D CAD model perpendicular to the Z-axis section. A series of layers have been got which satisfy the error requirements ,in order to achieve the layered rapid prototyping manufacturing. Finally ,the adaptive slicing algorithm was validated by an example which proves the feasibility and correctness of the algorithm.