CAJ | 학술논문

采用单体预乳化聚合法，以苯乙烯（ St）、甲基丙烯酸甲酯（ MMA）、丙烯酸丁酯（ BA）、丙烯酸（ AA）为单体，制备了苯丙微乳液，研究了合成温度、引发剂浓度等反应条件对苯丙乳液性能的影响。研究结果表明：当引发剂浓度为单体质量的0.7％，软硬单体的质量比为4砄6时，反应温度为85℃时，苯丙微乳液的综合性能良好。
채용단체예유화취합법，이분을희（ St）、갑기병희산갑지（ MMA）、병희산정지（ BA）、병희산（ AA）위단체，제비료분병미유액，연구료합성온도、인발제농도등반응조건대분병유액성능적영향。연구결과표명：당인발제농도위단체질량적0.7％，연경단체적질량비위4결6시，반응온도위85℃시，분병미유액적종합성능량호。
Styrene/acrylatemicro-emulsion was prepared by pre -emulsification method with styrene ( St ) , methylmethacrylate(MMA), butyl acrylate ( BA) and acrylics acid ( AA) as the monomers.The reaction conditions such as reaction temperature and initiator dosage on the performance of as-synthesized styrene acrylic emulsion were systematically studied.The results showed that the styrene/acrylate micro-emulsion with higher solid content had good combination property when mass fractions of initiator was 0.7%, mass ratio of m( BA):m( MMA+St) was 4砄6 and the reaction temperature was 85 ℃.