振动与冲击
振動與遲擊
진동여충격
JOURNAL OF VIBRATION AND SHOCK
2015年
10期
179-183
,共5页
孙桥%王建林%胡红波%于梅%白杰
孫橋%王建林%鬍紅波%于梅%白傑
손교%왕건림%호홍파%우매%백걸
计量学%激光干涉法冲击校准%冲击加速度灵敏度%测量不确定度%国际比对
計量學%激光榦涉法遲擊校準%遲擊加速度靈敏度%測量不確定度%國際比對
계량학%격광간섭법충격교준%충격가속도령민도%측량불학정도%국제비대
metrology%shock calibration with laser interferometry%shock acceleration sensitivity%measurement of uncertainty%international comparison
研究建立低 g 值碰撞式冲击加速度计量标准装置,在冲击加速度峰值20~10000 m/s2及脉冲持时0.5~10 ms 内实现基于碰撞式激励半正弦平方波形的加速度计冲击灵敏度激光干涉法高精度校准。校准不确定度为1%,k =2。介绍装置的结构组成及解决的关键技术,描述波形发生的材料种类,给出校准的实验数据及不确定度评估。低 g 值碰撞式冲击加速度计量标准装置为主导亚太计量规划组织冲击加速度研究性国际比对 APMP.AUV.V -P1的主要测量装置。
研究建立低 g 值踫撞式遲擊加速度計量標準裝置,在遲擊加速度峰值20~10000 m/s2及脈遲持時0.5~10 ms 內實現基于踫撞式激勵半正絃平方波形的加速度計遲擊靈敏度激光榦涉法高精度校準。校準不確定度為1%,k =2。介紹裝置的結構組成及解決的關鍵技術,描述波形髮生的材料種類,給齣校準的實驗數據及不確定度評估。低 g 值踫撞式遲擊加速度計量標準裝置為主導亞太計量規劃組織遲擊加速度研究性國際比對 APMP.AUV.V -P1的主要測量裝置。
연구건립저 g 치팽당식충격가속도계량표준장치,재충격가속도봉치20~10000 m/s2급맥충지시0.5~10 ms 내실현기우팽당식격려반정현평방파형적가속도계충격령민도격광간섭법고정도교준。교준불학정도위1%,k =2。개소장치적결구조성급해결적관건기술,묘술파형발생적재료충류,급출교준적실험수거급불학정도평고。저 g 치팽당식충격가속도계량표준장치위주도아태계량규화조직충격가속도연구성국제비대 APMP.AUV.V -P1적주요측량장치。
A low-g shock standard device based on rigid body collision for shock acceleration calibration was investigated and established within a half-sine squared acceleration wave shape range from 20 m /s2 to 10000 m /s2 and a pulse duration from 0.5 ms to 10 ms.The expanded calibration uncertainty for sensitivity of shock accelerometers with laser interferometry was 1%,k =2.The structure of the device and key technology involved were introduced.The waveform generation materials were described.The calibration results and uncertainty evaluation were provided.This low-g shock standard device was used to lead the international shock comparison APMP.AUV.V-P1.