云南冶金
雲南冶金
운남야금
YUNNAN METALLURGY
2015年
2期
67-71
,共5页
余继勇%周廷煦%毕红兴%岳忠朋
餘繼勇%週廷煦%畢紅興%嶽忠朋
여계용%주정후%필홍흥%악충붕
加压酸浸%加压中和%硫化锌精矿%锌浸出率%铁浸出率
加壓痠浸%加壓中和%硫化鋅精礦%鋅浸齣率%鐵浸齣率
가압산침%가압중화%류화자정광%자침출솔%철침출솔
pressure acid leaching%pressure neutralization%zinc sulfide concentrate%zinc leaching rate%iron leaching rate
研究在标准两段加压浸出试验研究和工业生产实践的基础上,开展两段加压浸出新工艺研究,即一段加压酸浸、二段加压中和处理硫化锌精矿的新方法,分别进行了浸出前液酸度、浸出温度、搅拌转速、浸出时间、液固比、氧分压等因素对锌、铁浸出率影响的试验研究.研究结果表明,在一定的技术条件下,锌浸出率≥98%,铁浸出率≤10%,较好地实现了锌的选择性浸出和铁的开路排放.
研究在標準兩段加壓浸齣試驗研究和工業生產實踐的基礎上,開展兩段加壓浸齣新工藝研究,即一段加壓痠浸、二段加壓中和處理硫化鋅精礦的新方法,分彆進行瞭浸齣前液痠度、浸齣溫度、攪拌轉速、浸齣時間、液固比、氧分壓等因素對鋅、鐵浸齣率影響的試驗研究.研究結果錶明,在一定的技術條件下,鋅浸齣率≥98%,鐵浸齣率≤10%,較好地實現瞭鋅的選擇性浸齣和鐵的開路排放.
연구재표준량단가압침출시험연구화공업생산실천적기출상,개전량단가압침출신공예연구,즉일단가압산침、이단가압중화처리류화자정광적신방법,분별진행료침출전액산도、침출온도、교반전속、침출시간、액고비、양분압등인소대자、철침출솔영향적시험연구.연구결과표명,재일정적기술조건하,자침출솔≥98%,철침출솔≤10%,교호지실현료자적선택성침출화철적개로배방.