振动与冲击
振動與遲擊
진동여충격
JOURNAL OF VIBRATION AND SHOCK
2015年
9期
171-176
,共6页
庞晓柯%周以齐%唐伟%王丽%米永振
龐曉柯%週以齊%唐偉%王麗%米永振
방효가%주이제%당위%왕려%미영진
工况传递路径分析%奇异值分解%振动贡献%传递率函数
工況傳遞路徑分析%奇異值分解%振動貢獻%傳遞率函數
공황전체로경분석%기이치분해%진동공헌%전체솔함수
OTPA%SVD%vibration contribution%transmissibility function
以某挖掘机新产品试验车为对象,研究发动机到驾驶室座椅的振动传递情况。应用奇异值分解技术对工况传递路径分析方法进行了改进,并采集运行工况试验的振动数据,建立了从发动机振动到驾驶室座椅振动的工况传递路径分析模型。对比座椅安装位置加速度的模型合成信号与实测信号的频域特征,研究发现两者吻合较好,从而验证了模型的正确性。对模型合成的输出信号进行频域分析,可以直观的研究需要关心的频率。结合各路径的振动贡献频谱图与矢量图,找出特定频率处需要改进的路径。最后利用传递率函数频谱图和输入加速度频谱图,提出具体的改进方法,为解决振动噪声传递类问题,提供了工程参考。
以某挖掘機新產品試驗車為對象,研究髮動機到駕駛室座椅的振動傳遞情況。應用奇異值分解技術對工況傳遞路徑分析方法進行瞭改進,併採集運行工況試驗的振動數據,建立瞭從髮動機振動到駕駛室座椅振動的工況傳遞路徑分析模型。對比座椅安裝位置加速度的模型閤成信號與實測信號的頻域特徵,研究髮現兩者吻閤較好,從而驗證瞭模型的正確性。對模型閤成的輸齣信號進行頻域分析,可以直觀的研究需要關心的頻率。結閤各路徑的振動貢獻頻譜圖與矢量圖,找齣特定頻率處需要改進的路徑。最後利用傳遞率函數頻譜圖和輸入加速度頻譜圖,提齣具體的改進方法,為解決振動譟聲傳遞類問題,提供瞭工程參攷。
이모알굴궤신산품시험차위대상,연구발동궤도가사실좌의적진동전체정황。응용기이치분해기술대공황전체로경분석방법진행료개진,병채집운행공황시험적진동수거,건립료종발동궤진동도가사실좌의진동적공황전체로경분석모형。대비좌의안장위치가속도적모형합성신호여실측신호적빈역특정,연구발현량자문합교호,종이험증료모형적정학성。대모형합성적수출신호진행빈역분석,가이직관적연구수요관심적빈솔。결합각로경적진동공헌빈보도여시량도,조출특정빈솔처수요개진적로경。최후이용전체솔함수빈보도화수입가속도빈보도,제출구체적개진방법,위해결진동조성전체류문제,제공료공정삼고。
The vibration of a new type of excavator prototype was inspected,and the vibration transmission from the engine to the cab seat was analyzed.The singular value decomposition (SVD)technique was applied to improve the method of operational transfer path analysis (OTPA).With the vibration test data under working condition,an OTPA model of vibration from the engine to the cab seat was built.The frequency domain features of the synthesized output signal agree well with those of the test output signal,so the model is proved valid.The key frequencies were revealed by analysing the synthesized output signal.The path necessary to be improved was identified in the light of all paths'vibration contribution spectrum and vector diagrams.Some specific improvements were proposed in accordance with the spectrum analysis of transmissibility function and acceleration.The research provides an efficient engineering reference to noise or vibration transmission control.