一重技术
一重技術
일중기술
CFHI TECHNOLOGY
2015年
2期
39-40,46
,共3页
冯晓明%孟祥东%李德飞
馮曉明%孟祥東%李德飛
풍효명%맹상동%리덕비
反应堆%栅格孔板%变形%加工
反應堆%柵格孔闆%變形%加工
반응퇴%책격공판%변형%가공
reactor%perforated plate%deformation%machining
介绍反应堆内构件中关键加工件下栅格孔板开孔前后的平面加工易产生较大的变形的特点,以及为克服该加工难点在平面加工过程中所采取的各种控制变形的措施。
介紹反應堆內構件中關鍵加工件下柵格孔闆開孔前後的平麵加工易產生較大的變形的特點,以及為剋服該加工難點在平麵加工過程中所採取的各種控製變形的措施。
개소반응퇴내구건중관건가공건하책격공판개공전후적평면가공역산생교대적변형적특점,이급위극복해가공난점재평면가공과정중소채취적각충공제변형적조시。
The bottom perforated plate, a critical internal component of reactors, is prone to deform as the result of machining on the surfaces before and after hole drilling. Some measures have been taken to overcome the machining difficulties and eliminate the deformation during machining process.