中原工学院学报
中原工學院學報
중원공학원학보
JOURNAL OF ZHONGYUAN INSTITUTE OF TECHNOLOGY
2015年
1期
63-66
,共4页
张文勇%肖卓%陈志宏%陈文元
張文勇%肖卓%陳誌宏%陳文元
장문용%초탁%진지굉%진문원
低碳钢%管-管%全位置自动焊接%工艺%性能
低碳鋼%管-管%全位置自動銲接%工藝%性能
저탄강%관-관%전위치자동한접%공예%성능
利用管-管全位置自动焊接设备研究了不同的焊接工艺对低碳钢管焊缝形貌和性能的影响.通过金相显微镜、扫描电镜分析了焊缝的组织形貌,利用显微硬度计测定了焊缝不同区域的硬度分布.结果表明,在焊接过程中,焊枪处于不同位置时,相应地调节焊接参数,才能保证良好的焊接成形质量.硬度测试表明,从基体到热影响区再到焊缝,硬度逐步升高.
利用管-管全位置自動銲接設備研究瞭不同的銲接工藝對低碳鋼管銲縫形貌和性能的影響.通過金相顯微鏡、掃描電鏡分析瞭銲縫的組織形貌,利用顯微硬度計測定瞭銲縫不同區域的硬度分佈.結果錶明,在銲接過程中,銲鎗處于不同位置時,相應地調節銲接參數,纔能保證良好的銲接成形質量.硬度測試錶明,從基體到熱影響區再到銲縫,硬度逐步升高.
이용관-관전위치자동한접설비연구료불동적한접공예대저탄강관한봉형모화성능적영향.통과금상현미경、소묘전경분석료한봉적조직형모,이용현미경도계측정료한봉불동구역적경도분포.결과표명,재한접과정중,한창처우불동위치시,상응지조절한접삼수,재능보증량호적한접성형질량.경도측시표명,종기체도열영향구재도한봉,경도축보승고.