建筑电气
建築電氣
건축전기
BUILDING ELECTRICITY
2015年
5期
63-68
,共6页
糜翔%肖中男%覃彬全%杨磊%刘青松
糜翔%肖中男%覃彬全%楊磊%劉青鬆
미상%초중남%담빈전%양뢰%류청송
接地装置%腐蚀速率%降阻剂%失重法%野外试验%室内试验%电化学测试法%金属腐蚀测试方法
接地裝置%腐蝕速率%降阻劑%失重法%野外試驗%室內試驗%電化學測試法%金屬腐蝕測試方法
접지장치%부식속솔%강조제%실중법%야외시험%실내시험%전화학측시법%금속부식측시방법
earth-termination system%corrosion rate%resistance reducing agent%weight-loss method%outdoor test%indoor test%electrochemical test%metal corrosion test
降阻剂对其包裹的金属接地材料会造成一定程度的腐蚀,因此降阻剂的腐蚀性必须符合相关标准的规定。目前通常采用失重法测试降阻剂的腐蚀性,利用失重法测试降阻剂腐蚀性包含两个试验过程,一是室内腐蚀试验,二是野外腐蚀试验。通过试验前后试样的重量变化计算降阻剂的腐蚀速率,用以判定降阻剂是否合格。用失重法对某品牌降阻剂进行腐蚀试验测试,结果表明该品牌降阻剂腐蚀性不符合相关标准要求。失重法等传统试验存在不足,降阻剂的腐蚀性测试建议采用电化学的试验方法。
降阻劑對其包裹的金屬接地材料會造成一定程度的腐蝕,因此降阻劑的腐蝕性必鬚符閤相關標準的規定。目前通常採用失重法測試降阻劑的腐蝕性,利用失重法測試降阻劑腐蝕性包含兩箇試驗過程,一是室內腐蝕試驗,二是野外腐蝕試驗。通過試驗前後試樣的重量變化計算降阻劑的腐蝕速率,用以判定降阻劑是否閤格。用失重法對某品牌降阻劑進行腐蝕試驗測試,結果錶明該品牌降阻劑腐蝕性不符閤相關標準要求。失重法等傳統試驗存在不足,降阻劑的腐蝕性測試建議採用電化學的試驗方法。
강조제대기포과적금속접지재료회조성일정정도적부식,인차강조제적부식성필수부합상관표준적규정。목전통상채용실중법측시강조제적부식성,이용실중법측시강조제부식성포함량개시험과정,일시실내부식시험,이시야외부식시험。통과시험전후시양적중량변화계산강조제적부식속솔,용이판정강조제시부합격。용실중법대모품패강조제진행부식시험측시,결과표명해품패강조제부식성불부합상관표준요구。실중법등전통시험존재불족,강조제적부식성측시건의채용전화학적시험방법。
Resistance reducing agents are liable to corrode the covered metal earthing material to a certain extent, so the corrosivity of the resistance reducing agent must comply with relevant standards. At present, the corrosivity of the resistance reducing agent is usually tested by the weight-loss method which comprises two test procedures, i. e. indoor corrosion test and outdoor corrosion test. The resistance reducing agent is judged to be qualified or not through computing the corrosion rate of the resistance reducing agent according to the weight change of the sample before and after the test. The result of the corrosion test on a branded resistance reducing agent by the weight-loss method indicates that the corrosivity of the tested resistance reducing agent does not comply with relevant standards. Due to shortcomings of traditional tests such as the weight-loss method, the electrochemical test is recommended to test the corrosivity of the resistance reducing agent.