机械工程材料
機械工程材料
궤계공정재료
MATERIALS FOR MECHANICAL ENGINEERING
2015年
5期
4-9
,共6页
张俊平%段先锋%史子木%韩福生
張俊平%段先鋒%史子木%韓福生
장준평%단선봉%사자목%한복생
孪生诱发塑性(TWIP)钢%孪晶%应变硬化%应变速率%拉伸性能%晶粒取向
孿生誘髮塑性(TWIP)鋼%孿晶%應變硬化%應變速率%拉伸性能%晶粒取嚮
련생유발소성(TWIP)강%련정%응변경화%응변속솔%랍신성능%정립취향
twining induced plasticity (TWIP) steel%twin%strain hardening%strain rate%tensile property%grain orientation
通过拉伸试验研究了温度和应变速率对孪生诱发塑性(TWIP)钢拉伸性能的影响.结果表明:随着温度升高,TWIP钢的强度逐渐下降,断后伸长率逐渐增加,应变硬化指数随真应变增加达到并维持在较高的水平,试验钢的均匀变形能力得到提高,宏观塑性增加;随应变速率增大,试验钢的流变应力升高,断后伸长率下降,抗拉强度基本保持不变,应变硬化率曲线上的平台区长度明显变短,这表明孪生受到抑制,较早达到硬化极值;应变硬化指数峰值随应变速率的增大而减小,TWIP钢的均匀变形能力及宏观塑性下降.
通過拉伸試驗研究瞭溫度和應變速率對孿生誘髮塑性(TWIP)鋼拉伸性能的影響.結果錶明:隨著溫度升高,TWIP鋼的彊度逐漸下降,斷後伸長率逐漸增加,應變硬化指數隨真應變增加達到併維持在較高的水平,試驗鋼的均勻變形能力得到提高,宏觀塑性增加;隨應變速率增大,試驗鋼的流變應力升高,斷後伸長率下降,抗拉彊度基本保持不變,應變硬化率麯線上的平檯區長度明顯變短,這錶明孿生受到抑製,較早達到硬化極值;應變硬化指數峰值隨應變速率的增大而減小,TWIP鋼的均勻變形能力及宏觀塑性下降.
통과랍신시험연구료온도화응변속솔대련생유발소성(TWIP)강랍신성능적영향.결과표명:수착온도승고,TWIP강적강도축점하강,단후신장솔축점증가,응변경화지수수진응변증가체도병유지재교고적수평,시험강적균균변형능력득도제고,굉관소성증가;수응변속솔증대,시험강적류변응력승고,단후신장솔하강,항랍강도기본보지불변,응변경화솔곡선상적평태구장도명현변단,저표명련생수도억제,교조체도경화겁치;응변경화지수봉치수응변속솔적증대이감소,TWIP강적균균변형능력급굉관소성하강.