CAJ | 학술논문

在固体散料称量所使用的秤体中，电子皮带秤的皮带容易磨损、跑偏、打滑，且溜槽式冲量秤在测量精度上很大程度依赖传感器的精度。针对以上问题，提出了一种新的滑槽式动态称量方法和装置，并进行了试验。结果表明：在满足称量的条件下，该方法和装置可以有效解决皮带秤的皮带磨损等问题和溜槽式冲量秤过分依靠高精度传感器的问题。
재고체산료칭량소사용적칭체중，전자피대칭적피대용역마손、포편、타활，차류조식충량칭재측량정도상흔대정도의뢰전감기적정도。침대이상문제，제출료일충신적활조식동태칭량방법화장치，병진행료시험。결과표명：재만족칭량적조건하，해방법화장치가이유효해결피대칭적피대마손등문제화류조식충량칭과분의고고정도전감기적문제。
In the current used scales in the solid powder weighing,the existing electronic belt scale’s belt is easy to wear,be off tracking and skid and the chute type impulse scales depends a great extent on sensors in the measurement accuracy. To solve these problems,this paper put forward a new chute type dynamic weighing method and the device and tested it. The results show that the problem of belt wear and the problem that the chute type impulse scales depends a great extent on sensors in the meas-urement accuracy can be avoided,and also it can achieve the purpose of weighing at the same time.